Hinged Pipe Vice

Hinged pipe vice, used for repetitive tasks on pipework. The frame of the pipe vice is made from cast iron with jaws made from hardened tool grade alloy steel with a corrosion resistant coating. The top jaw of the pipe vice is held in position with a hook which automatically engages when the vice is closed. Can be fitted to bench or stand.

Kennedy Pressure Testing Pump Spares

A light, portable and compact 60 bar pressure testing pump. Tests pressurised plumbing and central heating systems with the system full of water. (Not suitable for gas pipe testing because water must be used.) Robust powder-coated steel construction, With easy-fill 10ltr reservoir, 1.5m 1/2" reinforced hose and a pressure gauge graduated in bar and psi.

Standard Spares;
Gauge 60bar: Order Code KEN-567-9000K
Hose 60bar: Order Code KEN-567-9020K
Seal Kit: Order Code KEN-567-9040K

Swedish Pattern Pipe Wrenches

Narrow design for confined areas, used for gripping pipe and nuts. Forged chrome vanadium heat treated steel. Knurled adjusting nut with guiding reinforcement on handle. Conform to DIN 5234.

"S" Type

"S" shaped jaws grip at three points to ensure a maximum grip.

Spare Jaw & Nut

To suit Kennedy Standard Duty Pipe Wrenches

Spares and Accessories

To suit the Kennedy Drop Head Threader (KEN-588-8800K).

Stand & Tool Tray

Stand is of robust construction and is suitable for workshop and site use. Essential for use whilst cutting, bending and threading pipework. The stand is fitted with an integral tray for holding tools and fittings, wide angled legs give greater stability and the folding design provides easy storage and transportation. Fitted with anti-skid duck board for operator safety.

Spare Jaw & Nut

To suit Kennedy Standard Duty Pipe Wrenches

Kennedy Automotive Chain Pipe Cutter

Cuts thin wall pipe (stainless steel, copper, PVC etc.) up to 2.6mm thickness. The grip action eliminates hand gripping effort to ensure perfect tracking. Can be used for efficient cutting of exhaust pipes.

Kennedy 6-36mm Plastic Pipe Cutter

Stainless steel blade. Diecast alloy body. Extra wide lower jaws for easy production of 90 cuts. Guillotine action ensures a clean cut every time. 4-stage ratchet. Handle retaining loop for compact storage and blade safety. Replaceable blade. Not suitable for cutting metal.

Kennedy Pressure Testing Pump Spares

A light, portable and compact 60 bar pressure testing pump. Tests pressurised plumbing and central heating systems with the system full of water. (Not suitable for gas pipe testing because water must be used.) Robust powder-coated steel construction, With easy-fill 10ltr reservoir, 1.5m 1/2" reinforced hose and a pressure gauge graduated in bar and psi.

Standard Spares;
Gauge 60bar: Order Code KEN-567-9000K
Hose 60bar: Order Code KEN-567-9020K
Seal Kit: Order Code KEN-567-9040K