Gas Test Gauge Manometer

Made from tough plastic, used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Marked in millibars the scale adjusts to zero the water level. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusion.

258F

600mm long, 60 millibar capacity.

Monument Tools Pipe Cutters

Using a pipe cutter rather than a hacksaw while installing new pipe work avoids swarf entering the system, which may cause problems or damage when system is used.

Copper Pipe Cutters
Rigid construction suitable for use in confined spaces. Large feed screw with fluted handle for accurate adjustment of cutter depth. The cutter is manufactured from hardened and tempered steel. Three different capacity cutters are available.

266E

Capacity: 12.7 - 44mm. Weight: 458g. Supplied with spare cutter in the fluted handle.

Sink Waste Cleaner

Suitable for unblocking domestic waste pipes including: sinks, baths and showers. All galvanised steel for resistance to rust. 2m body with gripping handle. Corkscrew end is for dislodging and moving any obstructions.

Bending Springs for Copper Pipes

Provides internal support to the copper pipe being bent to prevent kinking. Manufactured from spring steel with polished finish.

Internal

Monument Tools Automatic Copper Pipe Cutter

For work in confined spaces. Strongly made outer zinc coated metal body houses the inside mechanism made from steel which takes the load of the cut. Cuts copper pipes once the gate of the tool is closed over the pipe. Tool can be rotated in either direction. Available in 3 types: 15, 22 and 28mm capacities.

Bending Springs for Copper Pipes

Provides external support to the copper pipe being bent to prevent kinking. Manufactured from spring steel.

External

Monument Tools Radiator Valve Keys

Universal Type
For bleeding air from radiators. Suitable for 3/8" and 10mm square section radiator vent plugs and bleed screws with 14mm internal hexagon. Sliding tommy bar for use in areas with restricted access. Manufactured from case hardened steel.

Kennedy Stopcock Keys (Crutch Type)

For turning stopcocks on and off. Turning handle has one chisel end for lifting covers. Black painted finish.

Kennedy Stopcock Key

Length: 1060mm.

Monument Tools Multi-Purpose 4-Way Key

2059M
Uses include gas, water and electric meter cupboards, air-con units, stop valves, mains consoles, central heating pump cocks, radiator valves and drain off valves.

Compression Nut Spanner

Compression nut spanner single ended drop forged. 28mm (39mm A/F) to suit most 28mm compression nuts. Length 290mm.

2039C