Monument Tools Automatic Copper Pipe Cutter

For work in confined spaces. Strongly made outer zinc coated metal body houses the inside mechanism made from steel which takes the load of the cut. Cuts copper pipes once the gate of the tool is closed over the pipe. Tool can be rotated in either direction. Available in 3 types: 15, 22 and 28mm capacities.

Bending Springs for Copper Pipes

Provides external support to the copper pipe being bent to prevent kinking. Manufactured from spring steel.

External

Bending Springs for Copper Pipes

Provides internal support to the copper pipe being bent to prevent kinking. Manufactured from spring steel with polished finish.

Internal

Bending Springs for Copper Pipes

Provides internal support to the copper pipe being bent to prevent kinking. Manufactured from spring steel with polished finish.

Internal

Drain Unblocker

Suitable for unblocking domestic drains including: sinks, baths, showers and other small diameter pipes. The spring is housed within the container to avoid contact with clean surfaces. Corkscrew spring end is for dislodging and moving any obstructions.
Spring size: 6mm x 8m.

Monument Tools Manhole Lifting Keys

Heavy-duty manhole cover lifting keys with rectangular shaped end and triangular handle. Zinc plated. Supplied in pairs. Handle width: 100mm. Available in 4 lengths: 150, 300, 500 and 600mm.

150mm

Pump Nut Spanner

52mm. Steel tool works on most nuts next to domestic circulating pumps. 400mm long.

2040G

Bending Springs for Copper Pipes

Provides external support to the copper pipe being bent to prevent kinking. Manufactured from spring steel.

External

Monument Tools Radiator Valve Keys

Universal Type
For bleeding air from radiators. Suitable for 3/8" and 10mm square section radiator vent plugs and bleed screws with 14mm internal hexagon. Sliding tommy bar for use in areas with restricted access. Manufactured from case hardened steel.

Gas Test Gauge Manometer

Made from tough plastic, used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Marked in millibars the scale adjusts to zero the water level. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusion.

257C

300mm long, 30 millibar capacity.