Kobe? Scaler Needles (Set of 10)

For use with Kobe Needle Scaler NS4030 (illustrated).

Kobe? Retainers

Suitable for use with all Kobe air hammers.

Zip Change Type

Straight Continuous Use Die Grinder 1/4? - 25,000rpm

B3456
Use for grinding, polishing, buffing and deburring. Reversible hardened steel 1/4? collet. Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.

Specifications:
Model number: B3456.
Drive size: 1/4? (6mm), 1/8? (3mm).
Free speed: 25,000rpm.
Air pressure: 6.2Bar (90PSI).
Air consumption: 4CFM* (113ltr/min).
Air inlet thread: 1/4? NPT.
Minimum air hose size (ID): 10mm (3/8?).
Noise level?: 91dBA.
Sound power level?: 98dBA.
Vibration level#: 4.53m/s2.
Overall length: 160mm.
Weight: 0.6kg.

? Per Pneurop Standards EN 12366.
# Per EN 28927-1.

Action shots:
Vibration dampened rubber grip.
Adjustable air(speed) regulator.
Lever operated throttle with safety clip.
Comes with 1/4? and 3/8? collet spanners.

Kobe? Air Nibbler Die

Produce burr free cuts without distortion. Ideal for body shop and sheet metal work. Suitable for use with Kobe NB160 high performance nibbler.

To suit Nibbler Model NB160. Cuts on downstroke.

Kobe™ Additional Collets

To suit Kobe and similar micro die grinders.

Kobe? Air Hammer Chucks

Suitable for use with all Kobe air hammers. Cannot accidentally be released.

Safety Chuck

Spring load retainer, that must be unscrewed to allow tool release.

Kobe 180mm (7") Heavy-Duty Angle Grinder

GA1807L
Supplied with front exhaust, safety lever throttle, auxiliary side handle and adjustable safety guard.

Specifications:
Free speed: 7000rpm.
Grinding disc size: 180x6.3x22.2mm.
Air inlet thread: 1/4?? NPT.
Air hose size (ID): 10mm.
Air pressure: 90PSI.
Air consumption: 6,1/2 CFM*
Overall length: 340mm.
Weight: 3.6kg.
Sound power level: 109dB(A).
Sound Pressure/ Noise level: 103dB(A).
Vibration level: 2.6m/s.

*Based on a 15 second cycle per minute average use.

Speed Ratches

SR375
Ball type retainer, disc type reversing action, compact, lightweight design, ideal for automotive work.

Specifications:
10mm bolt capacity.
1/4" NPT air inlet thread for 10mm air hose.
150rpm free speed.
90psi air pressure.
4CFM* air consumption.
50ft/lbs torque.
Front exhaust
Overall length: 255mm.

*Based on a 15 second cycle per minute average use.

Kobe Air Ratchet Speed Wrench (3/8?? Square Drive)

Kobe Air Tools

The Kobe RPP480 air riveter is a lightweight & powerful tool for blind riveting.
Easy maintenance.
Supplied complete with 2.4mm (3/32”), 3.2mm (1/8”), 4.0mm (5/32”), 4.8mm (3/16”) Nosepieces.

RPP480 Air Riveter

RPP480 Specification:
Recommended Air Pressure: 70-90psi.
Air Consumption: 4cfm (113L/Min)*.
Air Inlet Thread: 1&fras1;4” NPT.
Air Hose Size (Id): 10mm (3&fras1;8”).
Nosepiece Sizes: 2.4mm (3&fras1;32”), 3.2mm (1&fras1;8”), 4.0mm (5&fras1;32”), 4.8mm (3&fras1;16”).
Overall Length: 165mm.
Overall Height: 274mm.
Net Weight: 1.5kg.
* Based On 15 Second Cycle Per Minute Average Use.

Kobe IW500 1/2" Impact Wrench

The Kobe IW500 1/2" square drive air impact wrench is suitable for the rapid removal or installation of threaded fasteners. The housing is manufactured from a single piece of aluminium, for increased strength and durability. The housing has a rubber shroud around the square drive to protect the surface of the work piece from accidentally impacts and a rear bumper to protect the tool when it?s not in use. Reverse gear is selected easily at the press of a button conveniently located above the 10 position throttle control. The short body length allows access into hard to reach areas.

IW500 - 1/2" Impact Wrench

One piece aluminium housing, 10 position power regulator and thumb switch for reversing.

Specifications:
Bolt capacity: 16mm.
Torque: 325 Nm.
Air inlet thread: 1/4" NPT.
Air hose size (ID): 8mm.
Air pressure: 90PSI.
Air consumption: 4CFM*.
Overall length: 191mm.
Weight: 2.4kg.
Noise level: 88dB(A).
Vibration: 4.2m/s2.
For a complete range of 1/2'' drive impact sockets see product group KEN-583.

*Based on 15 second cycle per minute average use.