Kobe™ 1/3 Sheet Heavy-Duty Orbital Sander

FOS890
For use on wood, metal, plastics, fibreglass, fillers etc. Connects to 10mm hose, dust extraction, adjustable speed regulator, low noise, vibration damped.

Specifications:
1/4" NPT air inlet thread.
93mm x 230 sheet size.
90PSI air pressure.
4CFM* air consumption.
Overall length: 175mm.
Pad size: 165 x 90mm.

*Based on a 15 second cycle per minute average use.

Chicago Pneumatic® 6mm Mini Die Grinder

CP9106Q-B
High efficient and powerful 0.28hp (210W) motor. Low noise level. Variable top speed regulator. Composite overmould grip. Rear exhaust.

Specifications:
Collet size: 1/4" (6mm).
Free speed: 22000rpm.
Power: 210W 0.28hp.
Length: 120mm (4.7").
Weight: 0.7kg.
Noise level: 80db(A).
Sound power: 91db(A).
Vibration: 2.5 m/s2.
Average air consumption: 4.35cfm.
Actual air consumption: 8.7cfm.
Free speed air consumption: 19.3cfm.
Min. hose size: 3/8".
Air inlet: 1/4" NPTF.

Kobe™ 10mm Air Pistol Drill

DP2210
10mm Jacobs chuck, stall resistant, heavy duty bearings, 1/2" HP motor, 3/8" - 24 spindle thread.

Specifications:
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 3/8"(10mm).
Chuck capacity: 10mm.
Spindle thread: 3/8" - 24.
Air pressure: 90PSI/6.3Bar.
Air consumption: 4CFM* (144 ltr/min).
Sound pressure level: 87dBA.
Sound power level: 103dBA.
Vibration level: 1.5m/s2.
Overall length: 165mm.

*Based on a 15 second cycle per minute average use.

Kobe™ Additional Collets

To suit Kobe and similar micro die grinders.

Kobe Industrial Air Tools

The Kobe IWS500 is a tough industrial air impact wrench, with a 10 position power regulator and thumb switch for selecting reverse. Fully polished single piece aluminium housing with bump guards.

IWS500 1/2" Impact Wrench Kit

IWS500 spefication:
Drive: 1/2''Sq
Working maximum Torque: 325 Nm
Operating pressure: 90psi
Air inlet thread: 1/4'' NPT for 10mm air hose.
Air consumption: 4CFM*.
Bolt capacity: 16mm.
Overall length: 191mm.
Free speed: 7,000rpm.
Noise level: 93dB(A).
Vibration: 1.21 m/s2.

Set includes:
1/2'' impact wrench.
10 metric sockets: 9, 10, 11, 12, 13, 14, 17, 22, 24 and 27mm.
Threaded tailpiece, in-line mini-oiler and oil bottle.
Kit supplied complete in robust blow-moulded case.

*Based on a 15 second cycle per minute average use.

Kobe Pistol Air Screwdriver Kit

SP1825K
Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
45 - 115lbs/inch.
Overall length: 178mm.
1/4" hex drive capacity.

Contents:
SP1825 screwdriver.
Hexagon wrench and spanner.
No.1, 2 & 3 x 50mm crosspoint bits.
4, 5 & 6mm x 50mm slotted bits.
No.2 x 100mm crosspoint double-ended bit.

*Based on a 15 second cycle per minute average use.

Kobe™ Surface Conditioning and Finishing Kit

Multi-purpose kit containing:
one of each of the following surface preparation discs - fine, medium & coarse.
2x abrasive disc grades - P36, P60, P80 & P120.
1x 6mm diameter shank to fit the backing pad.
One Kobe angle die grinder with 1/4" NPT air inlet thread for 10mm air hose, 90PSI air pressure, 4CFM* air consumption.
Supplied in a sturdy plastic carry case.

*Based on a 15 second cycle per minute average use.

High productivity, low consumption & ergonomic.

CP7769
3/4” composite impact wrench. 1440ft.lbs (1950Nm) of maximum torque in reverse. Low consumption air motor at 31cfm (14.7l/s). Insulating and lightweight composite handle. S2S easy forward reverse. Lightweight with a magnesium clutch housing. Universal and durable twin hammer mechanism. Full teasing developed trigger. Maximise operator comfort with a productive and lightweight tool. Energy saving.

Output drive: 3/4”.
Free speed: 7,000rpm.
Working torque range: 407 - 1464Nm.
Maximum torque: 1950Nm.
Average air consumption: 7.75cfm.
Air consumption @ load: 31cfm.
Air consumption @ load: 14.7l/s.
Air inlet NPTF: 3/8”.
Sound pressure: 97dBA.
Vibration a (ISO-28927-2): 12.6m/s2.
Vibration K (ISO-28927-2): 3.4m/s2.
Length: 214mm.
Weight: 3.4kg.

Kobe™ Angle Die Grinder

GDA2206L
Safety lever throttle, reverse exhaust, Ideal for polishing, grinding & buffing. suitable for use in confined areas.

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Overall length 160mm.
Collet size 6mm.

*Based on a 15 second cycle per minute average use.

Dynabrade® Mini-Dynafile Abrasive Belt Tool

15003
Ideal for strap polishing and working in narrow openings. Lightweight ergonomic design handle features 7° offset. Multi-position grinding head pivots 360°. Belt guard easily detaches for quick abrasive change; simple belt tracking adjustment knob.

Specifications:
Belt size: (W)1/8-1/2"(3-13mm) x (L)12"(305mm).
Power: .4HP.
Motor free speed: 25,000rpm.
Max SFPM: 4890.
Motor style: 7° offset.
Exhaust type: rear.
Max. Air Flow @ 90 PSIG (6.2 Bar): 20SCFM.
Air Inlet: 1/4" NPT.
Hose I.D.: 1/4"(6mm).
Length: 298mm.
Height 89mm.
Sound level: 75dB(A).
Weight: 0.77kg.