产品 / 切削工具 / 数控车刀
编号：IND1064400K
●产品描述：
Indexa-Seiki? Screw-On External Toolholders
For further technical and dimensional specifications please refer to our catalogue.
SCLC - Right Hand
95 Approach for for 7 positive 80 rhombic inserts.
编号：PRO1066800P
●产品描述：
Indexable Toolholder & Insert Sets
Tool supplied complete with 10 Carbide inserts, in a choice of P Grade for steels and general use, or K Grade for cast iron and non-ferrous applications. Inserts supplied will vary according to availability.
PCLN R
95° approach. Uses CN_A & CN_G Inserts. For boring bar details see IND-106-6800K/-6820K
编号：SNK1220672E
●产品描述：
Sandvik Coromant CoroDrill 880 Indexable Drilling Inserts
Guide to Geometry/Feed:
-GM geometry is the basic choice for most materials. Medium feed.
-LM geometry is the best choice for long chipping materials, e.g. low carbon steel and stainless steels. Medium feed, insert with sharp positive edge.
-GR geometry is the high feed choice for steel and cast iron. Insert with strong reinforced edge, suitable for roughing.
-GT geometry is a problem solver for unstable conditions and interrupted cuts. Low to high feed. Good chip control in most materials.
For all technical and dimensional specifications please refer to our catalogue.
CoroDrill 880 Indexable Drilling Insert
Insert size: 880.. 06 04 W06H-P (Peripheral insert). Geometry: -GM. Grade 4014.
编号：PRO1061980P
●产品描述：
Indexable Toolholder & Insert Sets
Tool supplied complete with 10 Carbide inserts, in a choice of P Grade for steels and general use, or K Grade for cast iron and non-ferrous applications. Inserts supplied will vary according to availability.
PCLN R/L
95° approach. Uses CN_A & CN_G Inserts. For toolholder details see IND-106-1980K/-2000K/-2040K/-2060K.
编号：PRO1060100A
●产品描述：
Iscar & Indexa-Seiki? indexable Toolholder & Insert Sets
The Indexa-Seiki? PCLNR 95 approach toolholder is designed for negative approach 80 rhombic inserts and is supplied with ten Iscar CNMG inserts grade IC9025.
Grade Description: IC9025 (ISO P20-P30/M15-M30)
A TiCN/AI203/TiN multilayer CVD coated grade. Especially recommended for turning forged, low carbon and low alloyed steel parts. Copes efficiently with machining stainless steel at finishing and medium conditions, for general purpose medium turning.
PCLNR Toolholder & Insert Sets
编号：SNK1020882P
●产品描述：
Sandvik Coromant CoroDrill 880 Drill Bodies
Stronger drill body with new surface treatment can withstand higher feeds. Wiper geometry for best surface finish. Optimized chip channels for accelerated chip evacuation. Easy identification due to laser marking with drill-, insert- and screw codes on the drill shank.
For all dimensional/technical specifications and for a full range of available Inserts, please refer to our catalogue.
Cylindrical shank - flat according to ISO 9766.
CoroDrill 880 Drill Bodies
编号：PRO1067480P
●产品描述：
Indexable Boring Bar Sets
This toolholder is supplied complete with 10 Carbide inserts, either P Grade for steels and general use, or K Grade for cast iron and non-ferrous applications.
Type of inserts subject to availability.
SCLC R/L Boring Bar with 10 Inserts
95° approach. Uses CC_T Inserts. For boring bar details see IND-106-7380K/-7400K/-7480K/-7500K.
编号：IND1064590K
●产品描述：
Indexa-Seiki? Screw-On External Toolholders
For further technical and dimensional specifications please refer to our catalogue.
SDJC - Left Hand
93 Approach for 7 positive 55 rhombic inserts.
编号：SNK1020920X
●产品描述：
Sandvik Coromant CoroDrill 880 Drill Bodies
Stronger drill body with new surface treatment can withstand higher feeds. Wiper geometry for best surface finish. Optimized chip channels for accelerated chip evacuation. Easy identification due to laser marking with drill-, insert- and screw codes on the drill shank.
For all dimensional/technical specifications and for a full range of available Inserts, please refer to our catalogue.
Cylindrical shank - flat according to ISO 9766.
CoroDrill 880 Drill Bodies
编号：SNK1220690J
●产品描述：
Sandvik Coromant CoroDrill 880 Indexable Drilling Inserts
Guide to Geometry/Feed:
-GM geometry is the basic choice for most materials. Medium feed.
-LM geometry is the best choice for long chipping materials, e.g. low carbon steel and stainless steels. Medium feed, insert with sharp positive edge.
-GR geometry is the high feed choice for steel and cast iron. Insert with strong reinforced edge, suitable for roughing.
-GT geometry is a problem solver for unstable conditions and interrupted cuts. Low to high feed. Good chip control in most materials.
For all technical and dimensional specifications please refer to our catalogue.
CoroDrill 880 Indexable Drilling Insert
Insert size: 880.. 08 05 W10H-P (Peripheral insert). Geometry: -LM. Grade 4044: stainless steel, heat resistant material.