产品 / 切削工具 / 数控车刀
编号：IND1062450K
●产品描述：
Indexa-Seiki? Lever Lock External Toolholders
For further technical and dimensional specifications please refer to our catalogue.
PDJN - Left Hand
93 Approach for negative 55 rhombic inserts.
编号：SNK1020962E
●产品描述：
Sandvik Coromant CoroDrill 880 Drill Bodies
Stronger drill body with new surface treatment can withstand higher feeds. Wiper geometry for best surface finish. Optimized chip channels for accelerated chip evacuation. Easy identification due to laser marking with drill-, insert- and screw codes on the drill shank.
For all dimensional/technical specifications and for a full range of available Inserts, please refer to our catalogue.
Cylindrical shank - flat according to ISO 9766.
CoroDrill 880 Drill Bodies
编号：IND1070950K
●产品描述：
Indexa-Seiki Indexable Tooling Spares
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki toolholder you're using.
编号：IND1074350K
●产品描述：
Indexa-Seiki Indexable Tooling Spares
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki toolholder you're using.
编号：IND1063670K
●产品描述：
Indexa-Seiki? Lever Lock External Toolholders
For further technical and dimensional specifications please refer to our catalogue.
PSSN - Left Hand
45 Offset Approach for negative square inserts.
编号：IND1073400K
●产品描述：
Indexa-Seiki Indexable Tooling Spares
Within the Index-Seiki? range of indexable tooling spares you will find insert screws, Torx? keys, shims, clamps and pins to fit the Index-Seiki? toolholder you?re using.
编号：SNK1220689J
●产品描述：
Sandvik Coromant CoroDrill 880 Indexable Drilling Inserts
Guide to Geometry/Feed:
-GM geometry is the basic choice for most materials. Medium feed.
-LM geometry is the best choice for long chipping materials, e.g. low carbon steel and stainless steels. Medium feed, insert with sharp positive edge.
-GR geometry is the high feed choice for steel and cast iron. Insert with strong reinforced edge, suitable for roughing.
-GT geometry is a problem solver for unstable conditions and interrupted cuts. Low to high feed. Good chip control in most materials.
For all technical and dimensional specifications please refer to our catalogue.
CoroDrill 880 Indexable Drilling Insert
Insert size: 880.. 08 05 W08H-P (Peripheral insert). Geometry: -GM. Grade 4044: non-ferrous material, heat resistant material.
编号：SNK1020928C
●产品描述：
Sandvik Coromant CoroDrill 880 Drill Bodies
Stronger drill body with new surface treatment can withstand higher feeds. Wiper geometry for best surface finish. Optimized chip channels for accelerated chip evacuation. Easy identification due to laser marking with drill-, insert- and screw codes on the drill shank.
For all dimensional/technical specifications and for a full range of available Inserts, please refer to our catalogue.
Cylindrical shank - flat according to ISO 9766.
CoroDrill 880 Drill Bodies
编号：SNK1020836L
●产品描述：
Sandvik Coromant CoroDrill 880 Drill Bodies
Stronger drill body with new surface treatment can withstand higher feeds. Wiper geometry for best surface finish. Optimized chip channels for accelerated chip evacuation. Easy identification due to laser marking with drill-, insert- and screw codes on the drill shank.
For all dimensional/technical specifications and for a full range of available Inserts, please refer to our catalogue.
Cylindrical shank - flat according to ISO 9766.
CoroDrill 880 Drill Bodies
编号：IND1061690K
●产品描述：
Indexa-Seiki? External Toolholders - COMBINATION CLAMP
For further technical and dimensional specifications please refer to our catalogue.
MWLN - Left Hand
95 Approach for negative 80 trigon inserts