产品 / 切削工具 / 数控车刀
编号：SNK1020954A
●产品描述：
Sandvik Coromant CoroDrill 880 Drill Bodies
Stronger drill body with new surface treatment can withstand higher feeds. Wiper geometry for best surface finish. Optimized chip channels for accelerated chip evacuation. Easy identification due to laser marking with drill-, insert- and screw codes on the drill shank.
For all dimensional/technical specifications and for a full range of available Inserts, please refer to our catalogue.
Cylindrical shank - flat according to ISO 9766.
CoroDrill 880 Drill Bodies
编号：PRO1067720K
●产品描述：
Indexable Boring Bar Sets
This toolholder is supplied complete with 10 Carbide inserts, either P Grade for steels and general use, or K Grade for cast iron and non-ferrous applications.
Type of inserts subject to availability.
SDUCR Boring Bar with 10 Inserts
93° approach. Uses DC_T Inserts. For boring bar details see IND-106-7660K/-7720K.
编号：SNK1220669D
●产品描述：
Sandvik Coromant CoroDrill 880 Indexable Drilling Inserts
Guide to Geometry/Feed:
-GM geometry is the basic choice for most materials. Medium feed.
-LM geometry is the best choice for long chipping materials, e.g. low carbon steel and stainless steels. Medium feed, insert with sharp positive edge.
-GR geometry is the high feed choice for steel and cast iron. Insert with strong reinforced edge, suitable for roughing.
-GT geometry is a problem solver for unstable conditions and interrupted cuts. Low to high feed. Good chip control in most materials.
For all technical and dimensional specifications please refer to our catalogue.
CoroDrill 880 Indexable Drilling Insert
Insert size: 880.. 06 04 06H-C (Central insert). Geometry: -GR. Grade 1044: steel, cast iron*.
*first choice
编号：SNK1220601C
●产品描述：
Sandvik Coromant CoroDrill 880 Indexable Drilling Inserts
Guide to Geometry/Feed:
-GM geometry is the basic choice for most materials. Medium feed.
-LM geometry is the best choice for long chipping materials, e.g. low carbon steel and stainless steels. Medium feed, insert with sharp positive edge.
-GR geometry is the high feed choice for steel and cast iron. Insert with strong reinforced edge, suitable for roughing.
-GT geometry is a problem solver for unstable conditions and interrupted cuts. Low to high feed. Good chip control in most materials.
For all technical and dimensional specifications please refer to our catalogue.
CoroDrill 880 Indexable Drilling Insert
Insert size: 880.. 02 02 04H-C (Central insert). Geometry: -GR. Grade 1044: steel, cast iron*.
*first choice
编号：IND1072250K
●产品描述：
Indexa-Seiki Indexable Tooling Spares
To suit lever lock external toolholders
编号：PRO1065740P
●产品描述：
Indexable Toolholder & Insert Sets
Tool supplied complete with 10 Carbide inserts, in a choice of P Grade for steels and general use, or K Grade for cast iron and non-ferrous applications. Inserts supplied will vary according to availability.
STGC R
90° approach. Uses TC_T Inserts. For toolholder details see IND-106-5640K/-5660K/-5740K.
编号：PRO1067020P
●产品描述：
Indexable Boring Bar Sets
This toolholder is supplied complete with 10 Carbide inserts, either P Grade for steels and general use, or K Grade for cast iron and non-ferrous applications.
Type of inserts subject to availability.
PSKNR Toolholder with 10 Inserts
75° approach. Uses SN_G Inserts. For boring bar details see IND-106-7020K/7080K.
编号：IND1060940K
●产品描述：
Indexa-Seiki? External Toolholders - TOP CLAMP
90 Approach for 11 positive triangular inserts.
CTFP - Right Hand
For further technical and dimensional specifications please refer to our catalogue.
编号：IND1064650K
●产品描述：
Indexa-Seiki? Screw-On External Toolholders
93 Approach for 7 positive 55 rhombic inserts.
SDJC - Left Hand
编号：IND1063080K
●产品描述：
Indexa-Seiki? Lever Lock External Toolholders
For further technical and dimensional specifications please refer to our catalogue.
PSBN - Right Hand
75 Approach for negative square inserts.