Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Steel Ball Bearing Indentor

Bowers Metrology CV Rockwell Analogue Hardness Testers

Basic regular Rockwell bench tester range offering accuracy, reliability and durability at an extremely affordable price. Tests to all regular Rockwell scales.

W-600MBDL Rockwell Hardness Tester with Digital Display - Manual

Features:
Direct analogue display of HRC, B, A, F.
Rugged construction, will withstand toughest environments.
Includes range of test anvils, indenters and test blocks.
Accuracy conforms to EN-ISO 6508 (also ASTM-E18 CV-600A).
Large capacity to accommodate large test specimen.

Specifications:
Rockwell scales: A, B, C, D.
Hardness resolution: 0.5 of a Rockwell unit.
Test loads: 60, 100, 150kgf (10kgf preload).
Display: Dial indicator.
Test cycle: Motorised.
Dwell time: 0-30 sec (5 sec. step).
Data output: No
Specimen accommodation: Vertical space 160mm, horizontal space from centreline 160mm.
Specimen access: External surfaces, cylindrical surfaces down to 3mm.
Power supply: 220V 50Hz.
Machine dimensions: (W)150mm x (D)485mm x (H)700mm.
Weight: 85kg.

Portable Hardness Tester - Webster Type

The WEBSTER Hardness Testers are portable instruments that can perform on-site hardness testing on aluminium alloys, brass, copper and soft steel. A quick and easy test, the hardness value can be read out directly from the indicator with a simple clamp. Suitable for testing aluminium alloy profiles, tubings and sheet materials. Especially suitable for fast, non destructive quality inspection on the production site.

Features
• One hand operation and portability
• Variety of anvils permits testing a great variance of shapes
• Simple operation permits readings independent of the operator’s skill
• Test is made by simply applying pressure to the handles until" bottom" is felt
• Easy-to-read dial indicator with 20 graduations permits use of the tester as "go" and "no-go" gauge
• Standard hardness gauge tests materials up to 13mm in thickness



Material: Aluminium Alloy
Hardness range: 25-110HRE/58-131HV
Workpiece: Thickness: 13mm Max. Diameter: 10mm Min.
Measuring scope:0-20HW
Accuracy: 0.5HW
Weight: 0.5kg

Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Small Flat Anvil

Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Test Blocks

MTR110 Surface Roughness Tester

The Moore & Wright Surfmatic MTR110 is a pocket sized surface roughness measuring instrument ideally suited to rapid on-the-spot surface measurements.

Features:
Back-light LCD.
Dynamic Test Display: progress of cut-off length during testing.
Li-ion rechargeable batteries.
Protection slide on pick-up.
Auto-off after 90 seconds.
Pocket-size and economically priced.
Both Ra and Rz parameters in one instrument.
Features external calibration.
Large measuring range suitable for most materials.
Piezo-electric pick-up stylus for external surface.
(Note: When ordering this unit please specify UK/Euro Charger units).

Technical data and characteristics:
Dynamic display during testing, sound signal start-test-ready, auto-off 90 sec, back-light LCD.
Roughness parameters: Rz and Ra.
Measuring range: Rz 0.10-50 um/Ra 0.05-15.0 um.
Cut-off lengths: 0.25mm, 0.8mm, 2.5mm.
Tracing length: 6mm.
Tracing speed: 1mm/sec.
Admissible temperature range: 0-40C.
Power supply: 3.0 V/Li-ion batteries/low battery indication.
Dimensions and weight: 102mm x 70mm x 22mm - Weight 180g.
Charger: 9V DC.
Min. curvature of cylindrical surface 40mm diameter (V-grooved base).
Ra and Rz:
Rz is the mean of all of the maximum peak to valley heights, from each sampling length, within the assessment length.
Ra is the universal recognised and most used international parameter of roughness.
It is the arithmetic mean of the absolute departures of the roughness profile from the mean line.
(Note: UK/Euro Charger units not supplied with surface roughness tester - see above).

Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Test Blocks

Bowers Metrology CV Rockwell Analogue Hardness Testers

Basic regular Rockwell bench tester range offering accuracy, reliability and durability at an extremely affordable price. Tests to all regular Rockwell scales.

W-600MA Rockwell Hardness Tester with Analogue Display - Motorised

Features:
Direct analogue display of HRC, B, A, F.
Rugged construction, will withstand toughest environments.
Includes range of test anvils, indenters and test blocks.
Accuracy conforms to EN-ISO 6508 (also ASTM-E18 CV-600A).
Large capacity to accommodate large test specimen.

Specifications:
Rockwell scales: A, B, C, D.
Hardness resolution: 0.5 of a Rockwell unit.
Test loads: 60, 100, 150kgf (10kgf preload).
Display: Dial indicator.
Test cycle: Motorised.
Dwell time: 0-30 sec (5 sec. step).
Data output: No
Specimen accommodation: Vertical space 160mm, horizontal space from centreline 160mm.
Specimen access: External surfaces, cylindrical surfaces down to 3mm.
Power supply: 220V 50Hz.
Machine dimensions: (W)150mm x (D)485mm x (H)700mm.
Weight: 85kg.