产品 / 切削工具 / 开孔加工
编号：STT0508149R
●产品描述：
Starrett Bi-Metal Holesaws Constant Pitch HSS
Bi-Metal Constant Pitch Holesaws have 6 teeth per 25mm/inch with an aggressive cutting action, featuring a HSS cutting edge welded to a tough alloy steel body. The Constant Pitch provides a smooth cut on thinner gauge materials, with minimal tendency to bite or snag on contact with irregular surfaces. Cutting depth 41mm (1 5/8").
Holesaw and Arbor sizes:
14-25mm - use Arbor A4 or K4.
30-210mm - use Arbor A10 or K10.
Constant Pitch Bi-Metal HSS Holesaws
编号：KEN0506050K
●产品描述：
Kennedy Holesaw Variable Pitch Bi-Metal HSS
Kennedy variable pitch bi-metal high speed holesaws feature a very aggressive cutting action, which gives a very smooth finish and substantial reductions in noise levels. Noise reduction is achieved by disrupting the harmonics produced when sawing certain materials and structures such as tubing and angle. An improvement in swarf clearance is also achieved.
Cutting depth: 28.5mm (1.1/8'').
Holesaw and Arbor sizes:
14-30mm - use Arbor K1 or K4.
32-210mm - use Arbor K2 or K10.
编号：KEN0500320K
●产品描述：
Kennedy Holesaws Constant Pitch Bi-Metal HSS
Featuring a constant pitch - first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable.
6 teeth per inch.
38mm (1,1/2") cutting depth.
Holesaw and Arbor sizes:
14-30mm - use Arbor K1 or K4.
32-210mm - use Arbor K2 or K10.
For the complete range of Holesaws and Arbors, please refer to our catalogue.
编号：KEN0505730K
●产品描述：
Kennedy Holesaw Variable Pitch Bi-Metal HSS
Kennedy variable pitch bi-metal high speed holesaws feature a very aggressive cutting action, which gives a very smooth finish and substantial reductions in noise levels. Noise reduction is achieved by disrupting the harmonics produced when sawing certain materials and structures such as tubing and angle. An improvement in swarf clearance is also achieved.
Cutting depth: 28.5mm (1.1/8'').
Holesaw and Arbor sizes:
14-30mm - use Arbor K1 or K4.
32-210mm - use Arbor K2 or K10.
编号：KEN0507220K
●产品描述：
Carbide Tipped Holesaws
Kennedy carbide tipped holesaws last up to 10 times longer than standard hole saws and resist wear and heat caused by friction much better than traditional holesaws, making them the best choice for cutting tough material such as tile, stainless steel.
Holesaw and Arbor sizes:
14-30mm - use Arbor K1 or K4.
32-210mm - use Arbor K2 or K10.
Holesaws Carbide Tipped
编号：STT0508117S
●产品描述：
Starrett Bi-Metal Holesaws Constant Pitch HSS
Bi-Metal Constant Pitch Holesaws have 6 teeth per 25mm/inch with an aggressive cutting action, featuring a HSS cutting edge welded to a tough alloy steel body. The Constant Pitch provides a smooth cut on thinner gauge materials, with minimal tendency to bite or snag on contact with irregular surfaces. Cutting depth 41mm (1 5/8").
Holesaw and Arbor sizes:
14-25mm - use Arbor A4 or K4.
30-210mm - use Arbor A10 or K10.
Constant Pitch Bi-Metal HSS Holesaws
编号：KEN0505160K
●产品描述：
Kennedy Holesaw Variable Pitch Bi-Metal HSS
Kennedy variable pitch bi-metal high speed holesaws feature a very aggressive cutting action, which gives a very smooth finish and substantial reductions in noise levels. Noise reduction is achieved by disrupting the harmonics produced when sawing certain materials and structures such as tubing and angle. An improvement in swarf clearance is also achieved.
Cutting depth: 28.5mm (1.1/8'').
Holesaw and Arbor sizes:
14-30mm - use Arbor K1 or K4.
32-210mm - use Arbor K2 or K10.
编号：KEN0500410K
●产品描述：
Kennedy Holesaws Constant Pitch Bi-Metal HSS
Featuring a constant pitch - first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable.
6 teeth per inch.
38mm (1,1/2") cutting depth.
Holesaw and Arbor sizes:
14-30mm - use Arbor K1 or K4.
32-210mm - use Arbor K2 or K10.
For the complete range of Holesaws and Arbors, please refer to our catalogue.
编号：KEN0500290K
●产品描述：
Kennedy Holesaws Constant Pitch Bi-Metal HSS
Featuring a constant pitch - first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable.
6 teeth per inch.
38mm (1,1/2") cutting depth.
Holesaw and Arbor sizes:
14-30mm - use Arbor K1 or K4.
32-210mm - use Arbor K2 or K10.
For the complete range of Holesaws and Arbors, please refer to our catalogue.
编号：KEN0506140K
●产品描述：
Kennedy Holesaw Variable Pitch Bi-Metal HSS
Kennedy variable pitch bi-metal high speed holesaws feature a very aggressive cutting action, which gives a very smooth finish and substantial reductions in noise levels. Noise reduction is achieved by disrupting the harmonics produced when sawing certain materials and structures such as tubing and angle. An improvement in swarf clearance is also achieved.
Cutting depth: 28.5mm (1.1/8'').
Holesaw and Arbor sizes:
14-30mm - use Arbor K1 or K4.
32-210mm - use Arbor K2 or K10.