SMC One-Touch Mini Union Tee

KJT
Use to connect tubes in both 90° directions.
KJT04-00: Tube O.D. 4mm.
KJT06-00: Tube O.D. 6mm.

Rexroth Straight Plug Connectors

QR1-RSK Series
Push-in fitting straight plug connector.
Available in diameters: 4, 6, 8, 10, 12 and 14mm.

Ambient temperature min/max: +0°C/+60°C.
Working pressure min./max: -0.95 bar/10 bar.
Materials:
Housing: Polybutyleneterephthalate.
Seal: Acrylonitrile Butadiene Rubber.
Tooth lock washer: Stainless steel.
Release ring: Polyoxymethylene.
Release ring holder: Die cast zinc; Brass, nickel-plated.

Push-fit System - Compressed Air

Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.
Working Temperature Range
Minimum Working Temperature -20C
Maximum Working Temperature +70C
Working Pressure
Temperature Pressure
+23C 10 Bar
+70C 7 Bar

Equal Elbows

Connects plain pipe at 90.

SMC Self-Seal Fit Bulkhead Union Connectors

KCE
Use to connect tubes through a panel.
KCE04-00: Tube O.D. 4mm.
KCE06-00: Tube O.D. 6mm.
KCE08-00: Tube O.D. 8mm.

Pneumatically Operated Valves

Series: 3
Function: 3/2
Port: 1/8
Actuation - Return: Pilot Spring

Pneumatically Operated Valve - Pilot Spring

5 Port Solenoid Valve

Compact five port rubber seal valves. Body ported or base mounted.

Push-fit Solution for Plumbing & Heating Systems

For use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes Speedfit fittings can be used with copper pipe to BS EN 1057 and Speedfit cross-linked polyethylene (PEX) Barrier Pipe to BS7291. NOT to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standard Speedfit products are designed and manufactured under a fully integrated system assessed by B.S.I. to BS EN ISO9001. They are approved by the Water Regulations Advisory Scheme and BBA. Speedfit PEM? and PKM? fittings and Speedfit barrier pipe are kitemarked to BS7291 Part 1 and 3, Class S. (Licence No. KM39767). Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings. Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight. When used outdoors protect from ultra violet light by lagging or painting. It is recommended that all installations are checked prior to use to determine that a seal has been made.
Working temperatures and pressures: Central Heating: 3.0 bar at 92C. Hot Water: 6.0 bar at 65C. Cold Water: 12.0 bar at 20C.

Straight Tap Connectors

With brass swivel nut and sealing washer. Suitable for central heating systems.

Camozzi Swivel Run Tees

S6440
Super-rapid fittings for plastic tubes. Push-in fitting swivel run Tee.
Available in:
10mm tube - G1/4 thread.
10mm tube - G3/8 thread.
12mm tube - G3/8 thread.

PCL "100 Series" Airline Couplings (Hi-Duty)

Large diameter allows greater airflow making them suitable for industrial applications - free air flow rate at 7bar/100PSI: 100 to 120cfm (2830 to 3400ltr/min). All steel construction with hardened shoulder protects against accidental disconnection. Hard wearing passivated zinc finish.

Male Threaded

Kennedy® Air Actuated Spool Valves - KVF

General purpose spool valves. Media Compressed air and compressed gases. Mounting - body ported, manifold or through endcaps.
Materials:
Body & Spool: aluminium.
Seals: nitrile.
Endcaps: Glass filled polyester.
Seal spacers: PPS.