Equal Tube Tees
Series 6540

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).

Pneumatically Operated Valves

Series: 3
Function: 3/2
Port: 1/4
Actuation - Return: Pilot Pilot

Pneumatically Operated Valve - Pilot Pilot
Series: 3
Function: 3/2
Port: 1/4
Actuation - Return: Pilot Pilot

Camozzi Equal Tees

7540
Super-rapid compact fitting Technopolymer equal tube Tee.
Available in 4, 6, 8, and 10mm tubes.

Series 3 Electropneumatically Operated Valves

Series 3 solenoid valves are available in two main versions: electropneumatically actuated with mechanical spring return, electropneumatically actuated with external and internal air pressure supply.
General data:
Construction: spool - type
Valve group: 2 x 3/2 - 3/2 - 5/2 - 5/3 way C.C. C.O. C.P.
Materials: AL body, stainless steel spool, NBR seals
Ports: G1/8 - G1/4
Installation in any position
Operating temperature: 0 - 60C
(with dry air at -20C)

Camozzi Swivel Branch Tees

S6430
Super-rapid fittings for plastic tubes. Push-in fitting swivel branch Tee.
Available in:
10mm tube - G1/4 thread.
10mm tube - G3/8 thread.
12mm tube - G1/4 thread.
12mm tube - G3/8 thread.
12mm tube - G1/2 thread.

Camozzi Series 2 Manually Operated Console Minivalves

Manually operated console valves come standard with a 22mm diameter mounting aperture which consists of our own valves combined with manual devices. This feature means that all the manual devices, 22 in diameter, can be used. This series
of miniature valves has been specially designed to
satisfy all the application requirements of the controls
industry, with particular attention being paid to the
operating characteristics which are required from
these components:
Low actuating force=6N (1.35 lbs.)
Short operational stroke
Small dimensions
Speed and accuracy of signal
Reduced air consumption

M5 Valve (for use with actuators)

Port size: 10-32 UNF

Blocking Valve

Type: Bi-directional
Size: 1/8

Series MC

The filter regulators Series MC are available with ports G1/4, G3/8 and G1/2. They combine the features of the filters and regulators and have smaller overall dimensions than the two separate components.

General Data
Construction compact modular with filtering element in HDPE diaphragm type
Materials: zama, NBR, technopolymer.
Ports: G1/4 G3/8 G1/2.
Condensate capacity cm: 28, 72, 72.
Weight. 0.443 0.948 0.928kg.
Pressure gauge ports: G1/8.
Mounting: vertical in-line or wall-mounting.
Operating temperature: 0C to 50C at 10 bar.
Porosity of filtering element: 25um standard - 5um upon request.
Draining of condensate: manual - semi-automatic standard.
Finishing: enamelled.
Inlet pressure with standard drain and protected depressurisation: 0.3 - 16 bar with depressurisation, 0.3 - 10 bar with automatic drain, 1.5 - 12 bar for G3/8 and G1/2.



Size: G3/8-G1/2.
Ports: G3/8.
Drain type: manual semi-automatic, self-relieving.
Working pressure: 0,5 10.

Series 6000 Series Pneumatic Fitting Kits

These kits are available for a range of tube diameters and contain the most commonly used Series 6000 Super Rapid brass push in fittings.
Each kit contents:
3x 6540 Series equal tube tee
3x 6580 Series tube to tube
connector
3x 6550 Series equal tube elbow
5x S6520 Series swivel elbow
10x S6510 Series male stud

Camozzi Tube To Tube Couplings

6580
Super-rapid fittings for plastic tubes. Push-in fitting tube to tube connector.
Available in 4mm, 6mm, 8mm, 10mm and 12mm tubes.