Lockable Isolation 3-Way Valve

Connection: 1/4

Camozzi BSP Locking Nuts

1253
BSP adaptor-hexagon locking nuts. Available in 1/8" and 1/4" threads.

Series S6440

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Swivel Run Tees

Electro Pneumatically Operated Valves

Type 358
Number of ports/positions: 5/2.
Port size: G1/8?.
Actuation types: 015 = single solenoid,
spring return.
E15 = single solenoid,
external servo-command.
Flow rate: 700 Nl/min.
Solenoid interface: mech. sol. 22 x 22.

Type 358

Manually Operated Slide Valve

Aluminium body, stainless steel spool, NBR seals.
Ports: G1/8 – G3/4
Fluid: Filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted.



Type: Female/Female
Connection: 1/4

Series 24 Magnetic Mini Cylinders

Auto Shut-off Valve

Connection: 1/4
Type: Electropneumatic

Camozzi Female Equal Cross Couplings

2033
Series 2000 pipe fittings BSP adaptor female equal cross.
Available in threads G1/8, 1/4 and 3/8.

Electrical Foot Operated Pedal Valve - Series 3
Electrical foot pedal with a single-pole changeover contact microswitch and a front wire outlet (PG9). The pedal can be operated as bistable or monostable, by switching the selector.

Construction: single-pole changeover contact microswitch
Assembly: microswitch built into the pedal body
Cable entry: by means of wire PG9
Installation: floor mounted
Operating temperature: 0 ÷ 50°C

Electrical foot pedal with a single-pole changeover contact microswitch and a front wire outlet (PG9). The pedal can be operated as bistable or monostable, by switching the selector.

Construction: single-pole changeover contact microswitch
Assembly: microswitch built into the pedal body
Cable entry: by means of wire PG9
Installation: floor mounted
Operating temperature: 0 ÷ 50°C

Series 61 Aluminium Profile Cylinders

Double Acting.
Standard DIN/ISO 15552.
Stainless steel piston rod.
Anodised aluminium extrusion cylinder barrel.
Cast aluminium End Blocks.
Stroke min-max lengths: 10-1000mm.
Bore sizes: Ø 32, 40, 50, 63, 80, 100, 125mm.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure: 1 to 10 bar.
Speed: 10 to 1000mm/sec (no load).
Connections: Ø 32 – 1/8”, Ø 40, 50 – ¼”, Ø 63, 80 –3/8”, Ø 100, 125 – 1/2”.