Series 9 Manifold Bases
Size: 1
Type: 1 Single-sub Base - Side Outlets

Size: 2
Type: 2 Single-sub Base - Side Outlets

Camozzi Tube To Tube Elbows

7550
Super-rapid compact fitting Technopolymer equal tube elbow.
Available in 4, 6, 8, 10mm tubes.

Series S6520

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Male Stud Swivel Elbow

Series 32 Compact Magnetic Cylinders

Double Acting.
Standard ISO 21287.
Stainless steel rod.
Anodized aluminium extrusion.
Cast aluminium End Blocks.
Double Acting Stroke min-max Ø 20-25 : 510-500mm, Ø 20 : 10-500mm, Ø 25 : 10-500mm.
Bores: Ø 16, 20, 25.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure:
1 to 10 bar (Double-acting).
2 to 10 bar (Single-acting).
Speed: 10 to 1000mm/sec (no load).

Series 61 Aluminium Profile Cylinders

Double Acting.
Standard DIN/ISO 15552.
Stainless steel piston rod.
Anodised aluminium extrusion cylinder barrel.
Cast aluminium End Blocks.
Stroke min-max lengths: 10-1000mm.
Bore sizes: Ø 32, 40, 50, 63, 80, 100, 125mm.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure: 1 to 10 bar.
Speed: 10 to 1000mm/sec (no load).
Connections: Ø 32 – 1/8”, Ø 40, 50 – ¼”, Ø 63, 80 –3/8”, Ø 100, 125 – 1/2”.

Manually Operated Slide Valve

Aluminium body, stainless steel spool, NBR seals.
Ports: G1/8 – G3/4
Fluid: Filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted.



Type: Female/Female
Connection: 1/4

U73

Solenoid valves are used in fluid power pneumatic and hydraulic systems, to control cylinders, fluid power motors or larger industrial valves.

Nominal dimensions: 22 x 22.
Protection class: IP54 - DIN 40050.
IP65 (with connector Mod. 122-800).
Insulation: Class H (180C).
Connections: bipolar plus earth DIN 43650 (version B).
Protection: U70PET G7PA.



PET: U73
PA: G73
24V DC5W

Series 61 Aluminium Profile Cylinders

Double Acting.
Standard DIN/ISO 15552.
Stainless steel piston rod.
Anodised aluminium extrusion cylinder barrel.
Cast aluminium End Blocks.
Stroke min-max lengths: 10-1000mm.
Bore sizes: Ø 32, 40, 50, 63, 80, 100, 125mm.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure: 1 to 10 bar.
Speed: 10 to 1000mm/sec (no load).
Connections: Ø 32 – 1/8”, Ø 40, 50 – ¼”, Ø 63, 80 –3/8”, Ø 100, 125 – 1/2”.

Camozzi Male Branch Tees - Taper

2060
Series 2000 pipe fittings BSPT adaptor male/female branch Tee.
Available in G1/8, G1/4, G3/8 and G1/2 threads.

Direct Operated Solenoid Valves

Directly operated solenoid valve - threaded body, 3way NC 1/8.
Connection: 1/8
Function: 3/2 N.C
Orifice: 1.5mm

Direct Operated Solenoid Valve - Threaded Body
Directly operated solenoid valve - threaded body, 3way NC 1/8.
Connection: 1/8
Function: 3/2 N.C
Orifice: 1.5mm