产品 / 流体动力
品牌
分类
耐压 油/气 管接头
耐压油/气 管
液压/气动元器件
KC6-2FP KEN-FIT CONN. 6mm - G1/4 F/P

KC6-2FP KEN-FIT CONN. 6mm - G1/4 F/P

编号:KEN2912280K
●产品描述:
Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Connector to Female Parallel

KEC10 KEN-FIT ELBOW CONNECTOR 10mm

KEC10 KEN-FIT ELBOW CONNECTOR 10mm

编号:KEN2912730K
●产品描述:
Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Elbow Connector

AVD110 ELECT. AUTO DRAINVALVE 110V AC

AVD110 ELECT. AUTO DRAINVALVE 110V AC

编号:KEN2596210K
●产品描述:
Kennedy® Electronic Auto Drain Valve

Electronic timer for ultimate reliability. Adjustable interval and discharge times. Self cleaning valve needs no maintenance. LED indicators show operational status. Impulse test button. Supplied un-branded with full instructions - ideal for distributors. Includes tamper proof kit. Failure to carry out routine draining of compressed air systems can cause serious damage to 'downstream' components such as valves, cylinders and control systems. The Auto Drain Valve eliminates the risk of this potentially expensive problem by providing regular automatic condensate drainage. A special electronic timer is coupled to a purpose built self cleaning solenoid valve. The complete unit requires only a simple installation procedure. Once fitted the unit can be set with a variety of interval and discharge times to suit the particular compressed air system requirements. The unit is suitable for air, neutral gas and contaminated liquid discharge.

Specifications:
Electronic Timer:
Power on LED.
Valve open LED.
Interval time: 0.5 to 45 min.
Discharge time: 0.5 to 10 sec.
Solenoid valve: 0 to 16 bar.
Function: 2/2 NC.
Port connections: G3/8.
Main pressure range: 0-16 bar max.
Filtration: Strainer recommended.
Temperature range: Ambient -10°C to 50°C, Media -10°C to 140°C.
Lubrication: Not required.
Media: Air, gases, non-corrosive liquids.
Timer and solenoid valve assembly.
Electrical data: AC 220V, 50Hz,19W, AC 110V, 50Hz, 28W. Insulation: Class H 180C.
Protection: IP65 (with connector).
Temperature range: -10°C to 140°C.
Materials: Solenoid valve.
Tube and plunger: stainless steel.
Spring: stainless steel.
Body: brass.
Seals: Buna.



KFRE8-2MT K/FIT O/F REST. 8mm-G1/4 M/T

KFRE8-2MT K/FIT O/F REST. 8mm-G1/4 M/T

编号:KEN2914060K
●产品描述:
Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Outflow Restrictor to Male Taper

KVF865 G1/4 5/2 AIR SPRING SPOOL VALVE

KVF865 G1/4 5/2 AIR SPRING SPOOL VALVE

编号:KEN2944403D
●产品描述:
Kennedy® Air Actuated Spool Valves - KVF

General purpose spool valves. Media Compressed air and compressed gases. Mounting - body ported, manifold or through endcaps.
Materials:
Body & Spool: aluminium.
Seals: nitrile.
Endcaps: Glass filled polyester.
Seal spacers: PPS.



KFKCIM100HH 100MM HORIZONTAL REAR HINGE

KFKCIM100HH 100MM HORIZONTAL REAR HINGE

编号:KEN2942485F
●产品描述:
Kennedy® Horizontal Rear Hinges

Available in cylinder diameters of 32mm, 40mm, 50mm, 63mm, 80mm and 100mm.



KTB10-4MT KEN-FIT BR/TEE10mm - G1/2 M/T

KTB10-4MT KEN-FIT BR/TEE10mm - G1/2 M/T

编号:KEN2916620K
●产品描述:
Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Branch Tee to Male Taper

KC8-1MT KEN-FIT CONN. 8mm - G1/8 M/T

KC8-1MT KEN-FIT CONN. 8mm - G1/8 M/T

编号:KEN2912550K
●产品描述:
Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Connector to Male Taper

HM32/20 32mm REAR CLEVIS, MALE

HM32/20 32mm REAR CLEVIS, MALE

编号:KEN2942407H
●产品描述:
Kennedy® Rear Clevis Male

Available in cylinder diameters of 32mm, 40mm, 50mm, 63mm, 80mm and 100mm.



KR12S-8 KEN-FIT REDUCER 12mm STEM-8mm

KR12S-8 KEN-FIT REDUCER 12mm STEM-8mm

编号:KEN2915560K
●产品描述:
Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Reducer Stem