Bosch Rexroth Pneumatic Fittings

Rexroth QR1 Series push in pneumatic fittings type are available for inch tubing/NPT threads and metric tubing/ISO-G (BSPP) threads. The user friendly oval release ring allow the push-in fittings to quickly release from the tubing much more easily than traditional round release rings. QR1 fittings come in standard and mini sizes, plus function fittings such as ball valves, check valves, flow control etc. They feature premium materials such as the stainless steel tube locking mechanism and polymer body and release ring.

QR1-RTK Series T-Plug Connector Pneumatic Fitting

Standard Metric M5-G T-Plug Connector push fit pneumatic fitting for compressed air hoses: 4 to 16mm diameter.

For further specification on this product please see the attached PDF under the additional information tab.

Rexroth Straight Plug Connectors

QR1-RSK Series
Push-in fitting straight plug connector.
Available in diameters: 4, 6, 8, 10, 12 and 14mm.

Ambient temperature min/max: +0°C/+60°C.
Working pressure min./max: -0.95 bar/10 bar.
Materials:
Housing: Polybutyleneterephthalate.
Seal: Acrylonitrile Butadiene Rubber.
Tooth lock washer: Stainless steel.
Release ring: Polyoxymethylene.
Release ring holder: Die cast zinc; Brass, nickel-plated.

Bosch Rexroth Pneumatic Fittings

The AS FRE series includes individual filters, regulators and lubricators plus many other components which are modular in design, allowing both standard and custom combinations. The AS Series is very versatile and has functionality that corresponds to current industry demands.

AS3-FRE Series Regulator with Gauge

Port: G3/8
QN: 4300 l/min
Working pressure min./max.: 1.5/16bar
Adjustment range min./max.: 0.5/8bar
Condensate drain: Semi-automatic, open without pressure

Bosch Rexroth Pneumatic Fittings

5/2 way valve, series 581 size 2.
Qn2700 l/min, plate connection with pilot valve width of 22mm.
Compressed air connection output: Base plate ISO 5599-1
Electr. Connection: Plug, form B, industry.
Manual override: with detent.

For further specification on this product please see the attached PDF under the additional information tab.

581 Series Size 2 Electro Pneumatically Operated Valves

For further specification on this product please see the attached PDF under the additional information tab.

Contact Sensor

Reed type contact sensor with 5M cable.
For use with OCT/PRE cylinders

ST6-Series

Bosch Rexroth Pneumatic Fittings

Rexroth QR1 Series push in pneumatic fittings type are available for inch tubing/NPT threads and metric tubing/ISO-G (BSPP) threads. The user friendly oval release ring allow the push-in fittings to quickly release from the tubing much more easily than traditional round release rings. QR1 fittings come in standard and mini sizes, plus function fittings such as ball valves, check valves, flow control etc. They feature premium materials such as the stainless steel tube locking mechanism and polymer body and release ring.

QR1-RSM Series Bulkhead Connector Pneumatic Fitting

Standard Metric M5-G Bulkhead Connector push fit pneumatic fitting for compressed air hoses: 4 to 12mm diameter.

For further specification on this product please see the attached PDF under the additional information tab.

Bosch Rexroth Pneumatic Fittings

Standard: ISO 5599-1
Frame size: ISO 2
Compressed air connection output: G 3/8.
Reversed pressure supply permissible.

For further specification on this product please see the attached PDF under the additional information tab.

581 series Size 2 Single Subbase with thread Connections on the Side

Rexroth Connection Pieces

QR1-RDS Series
Pin bushing connection pieces.
Available in 4, 6, 8 and 10mm diameters.

Ambient temperature min/max: +0°C/+60°C.
Working pressure min/max: -0.95 bar/10 bar.
Materials:
Housing: Polybutyleneterephthalate.

Bosch Rexroth Pneumatic Fittings

AS3-MBR Series Air Regulator Mounting Plate for use with Rexroth AS3 series air preparation units.

For further specification on this product please see the attached PDF under the additional information tab.

AS3-MBR Series Air Regulator Mounting Plate

For further specification on this product please see the attached PDF under the additional information tab.

Rexroth T-Unions

QR1-RTT Series
2x push-in fitting T-union with external thread.
Available in threads:
G1/8 x 6mm diameter.
G1/8 x 8mm diameter.
G1/4 x 6mm diameter.
G1/4 x 8mm diameter.
G1/4 x 10mm diameter.
G1/4 x 12mm diameter.
G3/8 x 10mm diameter.
G3/8 x 12mm diameter.
G3/8 x 14mm diameter.
G1/2 x 12mm diameter.

Ambient temperature min/max: +0°C/+60°C.
Working pressure min/max: -0.95 bar/10bar
Materials:
Housing: Polybutyleneterephthalate.
Seal: Acrylonitrile Butadiene Rubber.
Tooth lock washer: Stainless steel.
Release ring: Polyoxymethylene.
Release ring holder: Die cast zinc; Brass, nickel-plated.
Thread: Brass, nickel-plated.