SMC Pneumatic Fittings

Series AKH check valves offer various configurations to provide design solutions based on operating conditions. The series is compact and lightweight with low cracking pressure. The AKH with one-touch fitting, straight type, is easily installed in pipelines, while the male connector type can be mounted directly onto equipment.

AKH Series Check Valve

In-Line Type

AS series in line speed controllers minimise installation time and cost as they reduce the mounting height and enable compact machinery design. The number of needle rotations has been increased from 8 to 10 turns to permit easy control at low speeds. Applicable tube material nylon, soft nylon and polyurethane tubing.
Operating pressure: 1MPa max.

Mounting Accessories

Double Knuckle Joint

Push-Fit Pneumatic Fittings

Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer.
Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: - 0.9 bar min to + 10 bar max.
Temp range: - 20C min to + 70C max.
Tube suitability: nylon, polyurethane.

KQ2H04-01S: Tube O.D. 4mm. R 1/8.
KQ2H04-02S: Tube O.D. 4mm. R 1/4.
KQ2H06-01S: Tube O.D. 4mm. R 1/8.
KQ2H06-02S: Tube O.D. 6mm. R 1/4.
KQ2H06-03S: Tube O.D. 6mm. R 3/8.
KQ2H08-01S: Tube O.D. 8mm. R 1/8.
KQ2H08-02S: Tube O.D. 8mm. R 1/4.
KQ2H08-03S: Tube O.D. 8mm. R 3/8.
KQ2H10-01S: Tube O.D. 10mm. R 1/8.
KQ2H10-02S: Tube O.D. 10mm. R 1/4.
KQ2H10-03S: Tube O.D. 10mm. R 3/8.
KQ2H10-04S: Tube O.D. 10mm. R 1/2.
KQ2H12-02S: Tube O.D. 12mm. R 1/4.
KQ2H12-03S: Tube O.D. 12mm. R 3/8.
KQ2H12-04S: Tube O.D. 12mm. R 1/2.
KQ2H16-03S: Tube O.D. 16mm. R 3/8.
KQ2H16-04S: Tube O.D. 16mm. R 1/2.

One Touch Male Connectors

SMC Pneumatic Fittings

The VQ20/30 series is a pilot operated, two port multi-media valve. The series is compact and lightweight with a large flow capacity. The VQ20/30?s long life, high speed coil (up to 20 million cycles at 100cps for pneumatic use) along with its all plastic construction, make it an excellent choice for those who want high performance at a lower cost.

VQ20 Series 2 Port Solenoid Valve, Pilot Operated

Series: 2(VQ21)
Body Style: A (single unit)
Coil Voltage: 5 (24V DC)
Lead Wire: Y (DIN Terminal)
Voltage Protection: Z (Light & Surge Suppressor)
Port Size: C8
Option: F Bracket

SMC Pneumatic Fittings



MGP Series Compact Guide Cylinder

Possible piping from two directions. Two types of guide rod bearing to accommodate various applications (Slide bearing,
Ball bearing). Auto switches can be mounted.

Compact guide cylinder
Bearing Type: Slide bearing
Bore size: 12mm
Cylinder stroke: 10mm

For further specification on this product please see the attached PDF under the additional information tab.

SMC Pneumatic Fittings

Finger valve series VHK has a large effective area of 2.0 to 17.5mm. This series begins with a minimum tube O.D of 4. The valve direction clearly indicates whether the valve is open or closed (shut to open is counter- clockwise). Classification of knob by color difference facilitates distinction between 2 port valves (gray) and 3 port valves (blue).

VHK Series Finger Valve

Manifold Block Assemblies

Manifold block assemblies for manifold expansion. One-touch timing.
*Blanking plate assemblies.

SMC Male Branch Tees

KQ2T
Male branch tees.



Colour: white.

Shock Absorbers

Automatic adjustment to the most appropriate absorption performance. High resistance to load deviation. Double seal enclosure.
Collision speed (m/s): 0.05 to 5.0.