产品 / 轴承 & 滚轴 / 滚珠轴承
| 品牌 |
|
编号：SNR6718011A
●产品描述：
SNR Bearings
SNR has developed a complete range of high quality ball thrust bearings. Thrust bearings are designed to maintain the shaft in one single direction. They admit low rotating speeds and sustain high axial loads.
You are strongly advised against submitting them to radial loading. Ball thrust bearings are comprised of separate items facilitating installation and maintenance. Grease and oil lubrication is feasible.
Applications: vertical shaft, lathe tailstock, plate-type pumps.
51100 Series Ball Thrust Bearings
编号：SNQ6714060L
●产品描述：
Deep Groove Ball Bearings
Widely used in machinery, automobiles, tractors, machine tools, motors, pumps, agricultural machinery and other high speed facilities.
编号：NTN6701800B
●产品描述：
Single Row Deep Groove Ball Bearings - C3 Internal Clearance
C3 Bearings have an internal clearance to cope with high speed environments where excess heat is generated.
Rubber Sealed Type
With rubber seals inserted into the outer raceway and in contact with the inner race providing protection against the ingress of moisture, dust and other foreign objects. The seals also retain the pre-filled grease in the bearing. Seals can be easily removed for applications that only require one seal.
编号：SNR6710495Q
●产品描述：
Double Row Angular Contact Ball Bearings
Self-aligning ball bearings are double row with a concave raceway to allow approximately 4° of misalignment. Available with cylindrical and tapered bore for use with adaptor sleeves.There are also a range of sealed versions available.
编号：SNR6714220N
●产品描述：
Angular Contact Bearings - Double Row
Double-row angular-contact ball bearings accept axial loads in both directions and can be used singly, as dual bearing units.? withstand axial loads in both directions? accept relatively high speeds of rotationThe construction of these bearings limits them to very small misalignment values, in the range of 0.06.
Series 32...A, 33...A
Contact angle 25, no filling slots and can accept axial loads in both directions. These bearings have synthetic material cages.
编号：SNQ6716080E
●产品描述：
Wide Series Deep Groove Ball Bearings - C3 Clearance
Slightly wider than the 6200 series with the same bore and outside diameter. Designed to withstand radial loads, withstand axial loads in both directions and operate at high speeds of rotation.
编号：NTN6702620K
●产品描述：
Single Row Deep Groove Ball Bearings - C3 Internal Clearance
C3 Bearings have an internal clearance to cope with high speed environments where excess heat is generated.
Open Type
Without seals to allow for the free circulation of either oil or grease, used in gearboxes and other assemblies where a lubricant is already present.
编号：SNR6701790N
●产品描述：
Deep Groove Ball Bearings - C3 Clearance
C3 bearings have an additional internal radial clearance to cope with high speed environments where excess heat is generated.
Shielded type:
With metal shields inserted into the outer raceway, these fit in closely to the inner race providing moderate protection against mechanical damage, and against the ingress of moisture, dust and other foreign objects. The shields also retain the pre-filled grease in the bearing. Shields can be easily removed for applications that only require one shield.
编号：NTN6702630B
●产品描述：
Single Row Deep Groove Ball Bearings - C3 Internal Clearance
C3 Bearings have an internal clearance to cope with high speed environments where excess heat is generated.
Open Type
Without seals to allow for the free circulation of either oil or grease, used in gearboxes and other assemblies where a lubricant is already present.
编号：NTN6712150H
●产品描述：
Single Row Deep Groove Ball Bearings - C3 Internal Clearance
C3 Bearings have an internal clearance to cope with high speed environments where excess heat is generated.
Open Type
Without seals to allow for the free circulation of either oil or grease, used in gearboxes and other assemblies where a lubricant is already present.