产品 / 轴承 & 滚轴 / 滚珠轴承
| 品牌 |
|
编号：NTN6718120A
●产品描述：
Thrust Ball Bearings
Thrust Bearings are designed primarily to support axial loads at contact angles between 30° and 90°. Just as with radial bearings, these bearings differ according to the type of rolling element they use. With thrust bearings, it is necessary to supply an axial preload in order to prevent slipping movement between the bearing's rolling element and raceways.
Comprising of caged ball bearing element and pair of shaft housing washers (bearing shaft washer and housing washer, and the normal contact angle is 90°. Axial loads can be supported in only one direction, radial loads cannot be accommodated. Spherical roller and needle roller versions are also available.
编号：NTN6702030A
●产品描述：
Single Row Deep Groove Ball Bearings - C3 Internal Clearance
C3 Bearings have an internal clearance to cope with high speed environments where excess heat is generated.
Shielded Type
With metal shields inserted into the outer raceway, these fit in closely to the inner race providing moderate protection against mechanical damage, and against the ingress of moisture, dust and other foreign objects. The shields also retain the pre-filled grease in the bearing. Shields can be easily removed for applications that only require one shield.
编号：SNR6718121F
●产品描述：
SNR Bearings
SNR has developed a complete range of high quality ball thrust bearings. Thrust bearings are designed to maintain the shaft in one single direction. They admit low rotating speeds and sustain high axial loads.
You are strongly advised against submitting them to radial loading. Ball thrust bearings are comprised of separate items facilitating installation and maintenance. Grease and oil lubrication is feasible.
Applications: vertical shaft, lathe tailstock, plate-type pumps.
51200 Series Ball Thrust Bearings
编号：SNR6714550N
●产品描述：
Self-Aligning Ball Bearings
2200 & 2300 Series self-aligning ball bearings are double row with a concave raceway to allow approximately 4° of misalignment. They have a tapered bore for use with adaptor sleeves. There are also a range of sealed versions available.
Taper Bore
编号：SNR6718120F
●产品描述：
SNR Bearings
SNR has developed a complete range of high quality ball thrust bearings. Thrust bearings are designed to maintain the shaft in one single direction. They admit low rotating speeds and sustain high axial loads.
You are strongly advised against submitting them to radial loading. Ball thrust bearings are comprised of separate items facilitating installation and maintenance. Grease and oil lubrication is feasible.
Applications: vertical shaft, lathe tailstock, plate-type pumps.
51200 Series Ball Thrust Bearings
编号：SNR6701750H
●产品描述：
Deep Groove Ball Bearings - C3 Clearance
C3 bearings have an additional internal radial clearance to cope with high speed environments where excess heat is generated.
Shielded type:
With metal shields inserted into the outer raceway, these fit in closely to the inner race providing moderate protection against mechanical damage, and against the ingress of moisture, dust and other foreign objects. The shields also retain the pre-filled grease in the bearing. Shields can be easily removed for applications that only require one shield.
编号：SNR6714265F
●产品描述：
Angular Contact Bearings - Double Row
Double-row angular-contact ball bearings accept axial loads in both directions and can be used singly, as dual bearing units.? withstand axial loads in both directions? accept relatively high speeds of rotationThe construction of these bearings limits them to very small misalignment values, in the range of 0.06.
Series 32...B, 33...B
Contact angle 32, with filling slots and accept axial loads (higher loads than Type A) in a predominant direction. Cage in pressed steel, synthetic material or machined brass.
编号：SNQ6712170S
●产品描述：
SNR Deep Groove Ball Bearings
Rubber seals inserted into the outer raceway and in contact with the inner race providing protection against the ingress of moisture, dust and other foreign objects.
编号：NTN6702601C
●产品描述：
Single Row Deep Groove Ball Bearings - C3 Internal Clearance
C3 Bearings have an internal clearance to cope with high speed environments where excess heat is generated.
Open Type
Without seals to allow for the free circulation of either oil or grease, used in gearboxes and other assemblies where a lubricant is already present.
编号：SNR6701600C
●产品描述：
SNR Deep Groove Ball Bearings
Open type without seals to allow for the free circulation of either oil or grease, used in gearboxes and other assemblies where a lubricant is already present.
Open Deep Groove Ball Bearings
Dimensions to ISO15