产品 / 轴承 & 滚轴 / 滚珠轴承
| 品牌 |
|
编号：SNR6714220Q
●产品描述：
Angular Contact Bearings - Double Row
Double-row angular-contact ball bearings accept axial loads in both directions and can be used singly, as dual bearing units.? withstand axial loads in both directions? accept relatively high speeds of rotationThe construction of these bearings limits them to very small misalignment values, in the range of 0.06.
Series 32...A, 33...A
Contact angle 25, no filling slots and can accept axial loads in both directions. These bearings have synthetic material cages.
编号：SNR6714530Z
●产品描述：
Self Aligning Bearings
With double ball rows and a spherical raceway in the outer ring, self-aligning ball bearings can compensate for installation errors or shaft misalignment. Useful for applications requiring high rotating speeds while exercising moderate radial, and moderate or low axial loading. Available in cylindrical bore or taper bore (K suffix). Clearance is standardised (ISO 5753). The values are different for cylindrical bore and tapered bore bearings (suffix K). The latter have a significantly larger clearance to allow the reduction in clearance resulting from the adapter sleeves interference fit.
Self Aligning - Taper Bore
编号：SNR6701930H
●产品描述：
SNR Deep Groove Ball Bearings
With Shields
编号：SNR6714545P
●产品描述：
Self-Aligning Ball Bearings
2200 & 2300 Series self-aligning ball bearings are double row with a concave raceway to allow approximately 4° of misalignment. They have a tapered bore for use with adaptor sleeves. There are also a range of sealed versions available.
Cylinder Bore
编号：SNQ6714070S
●产品描述：
Narrow Series Deep Groove Ball Bearings - C3 Clearance
Slightly narrower than the 6000 series with the same bore and outside diameter. Designed to withstand radial loads, withstand axial loads in both directions and operate at high speeds of rotation.
编号：SNR6714120P
●产品描述：
Self Aligning Bearings
With double ball rows and a spherical raceway in the outer ring, self-aligning ball bearings can compensate for installation errors or shaft misalignment. Useful for applications requiring high rotating speeds while exercising moderate radial, and moderate or low axial loading. Available in cylindrical bore or taper bore (K suffix). Clearance is standardised (ISO 5753). The values are different for cylindrical bore and tapered bore bearings (suffix K). The latter have a significantly larger clearance to allow the reduction in clearance resulting from the adapter sleeves interference fit.
Self Aligning - Plain Bore
编号：SNR6701900C
●产品描述：
SNR Deep Groove Ball Bearings
With Shields
编号：SNQ6712010J
●产品描述：
SNR Bearings
SNR double-row ball bearings have become the natural substitute for single-row ball bearings for higher radial load applications, or for axial loads in both directions. Suitable for mean rotating speeds, these bearings only admit very slight misalignment between shaft and housing, to the order of 0.06.
Standard synthetic material cage.
Applications: electrical motors, household appliances, wood-machine spindles, small reduction gears.
4200 Series Double Row Radial Contact Ball Bearings
编号：NTN6702620D
●产品描述：
Single Row Deep Groove Ball Bearings - C3 Internal Clearance
C3 Bearings have an internal clearance to cope with high speed environments where excess heat is generated.
Open Type
Without seals to allow for the free circulation of either oil or grease, used in gearboxes and other assemblies where a lubricant is already present.
编号：SNR6716372E
●产品描述：
Precision Spindle Bearings
? Super Precision
? High speed capability
? Low running friction
? Can be mounted in any configuration
? Sealed versions available
? Ceramic balled versions available
? Supplied in pairs