Cast Iron Electrodes S-NFC

A Graphite coated Iron-Nickel alloy electrode for high strength jointing of cast iron and cold welding of cast iron, it deposits 95%Ni + 2%Fe weld metal.
Can be used for repairing broken cast iron, joining of cast iron to steel and building up worn parts.
Meets the following standards:
AWS A 5.15 E Ni-C1
Din 8573 E Ni BG 11

2.5mm

Recommended Amperage: 70A

Kennedy Mig Wire Reels

Kennedy A18 Mig Wire - deposits C - 1.3% Mn weld metal for mild and medium tensile steels. Copper coat finish and double deoxidised. Made to BS 2901/1 : 1983 A18 & BS EN 440 G3 Si1. For welding mild steel and C-Mn steels such as boilers, tanks, pipework, machinery, vehicle chassis fabrication and shipbuilding. Available in 0.7kg, 5.0kg and 15kg reels. (0.7kg and 5.0kg reels are random wound), 15kg reel is precision layer wound for positive snag free feeding). Reel sizes are designed and packaged for use on Kennedy Dual Mig welders, Mini Migs, Migmates etc. Use with CO2 or Ar-CO2 shielding gas.

Available in 0.6mm, 0.8mm and 1.0mm diameter.

A18 Mig Wire Reel

Kennedy Flux Cored Gasless Wire

General-purpose Mig wire with self-shielding flux core, allowing it to be used without the need for a separate shielding gas. Designed and packaged specifically for use on Kennedy Dual Mig welders, Mini Migs, Migmates etc. For welding mild steel and C-Mn steels such as boilers, tanks, pipework, machinery, vehicle chassis fabrication. 0.8mm diameter. Random wound and not layer wound. Available in 2 reel sizes 0.45kg and 0.90kg.

Flux Cored Gasless Wire

Kennedy Mig Wire Reels

Kennedy A18 Mig Wire - deposits C - 1.3% Mn weld metal for mild and medium tensile steels. Copper coat finish and double deoxidised. Made to BS 2901/1 : 1983 A18 & BS EN 440 G3 Si1. For welding mild steel and C-Mn steels such as boilers, tanks, pipework, machinery, vehicle chassis fabrication and shipbuilding. Available in 0.7kg, 5.0kg and 15kg reels. (0.7kg and 5.0kg reels are random wound), 15kg reel is precision layer wound for positive snag free feeding). Reel sizes are designed and packaged for use on Kennedy Dual Mig welders, Mini Migs, Migmates etc. Use with CO2 or Ar-CO2 shielding gas.

Available in 0.6mm, 0.8mm and 1.0mm diameter.

A18 Mig Wire Reel

Electrodes for Mild Steels

Available in 2.6 x 300mm, 3.2mm x 350mm and 4mm x 400mm.

E7018 (?Low Hydrogen?)

Basic coated, all positional rods.
Applications: for steel plate structural steels, pipe work and forgings. Ideal for repairs of casting and machinery, compensate for dilution effect of poor steels. Often used where rutile deposits may be at risk from cracking.
N.B. Suitable for AC (70V minimum open circuit) and DC. Optimum rooting operability is obtained using DC-.
Recommended Amperages;
Size(mm) 2.5 3.2 4.0.
Min. 70A 95A 130A.
Max. 100A 125A 170A.