Kennedy Carpenters Claw Hammers

Kennedy claw hammers with fibre glass shafts have textured slip resistant rubber grips that combine to dampen the impact transmitted through to the user's hand and wrist. Helping to reduce fatigue and the risk of RSI (repetitive strain injury). The high strength of the shaft and head bond make the hammer virtually unbreakable.

The hammer heads are manufactured from high-grade drop forged steel, fully heat-treated, with the claw being shaped in a continuous curve and tapered to grip the nail firmly.

20oz Claw Hammer with Fibreglass Shaft

Head size: 20oz

Spare Striking Faces For Thor Hammers

For malleable iron head hammers and split head hammers.

Rawhide Face

Sledge Hammers

Double faced sledge hammers are fully forged and heat-treated. Ideal for use on spikes, stakes, cold chisels and hardened nails. They are available with a hickory or fibreglass shaft.

Hickory Shaft BS 876.

Tested to the requirements of BS 876: 1981 (head stamped BS 876).

Thorex Plastic Faced Hammers

Chrome plated zinc heads with two screw on medium hardness plastic striking faces. Polyurethene shaft with non-slip textured PVC grip.

Wooden Handle

Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Nylon Faced Hammer

Kennedy Nylon faced striking hammers have no metal in the hammer faces that can mark the work piece. Each hammer has two replaceable screw-in nylon hammer faces that can be easily replaced when they become worn, without the use of any other tools - minimising down time. The striking faces are reinforced for extra strength and to prevent fracturing from off centre strikes. The nylon hammerheads have a precision moulded screw thread that screws securely into the chrome plate zinc hammerhead, which in turn is fixed to a fully moulded polypropylene shaft with a shock absorbing soft dual material grip, for improved grip and control.
Overall length: 305mm.

For all dimensional specifications please refer to our catalogue.

Spare Striking Faces For Thor Hammers

For malleable iron head hammers and split head hammers.

Nylon Face

Bumping Hammers

Highly polished striking heads and cheeks. One square and one round face. The most popular general purpose panel beating hammer. Hickory shaft. Manufactured to BS 4114.

Crown Faced

As above but with crowned face.

Senator® Industrial Claw Hammers

Used for general-purpose carpentry, particularly for driving and removing nails. With drop forged steel head and hardened and tempered faces. Textured rubber grip handle.

Fibreglass Shaft

Spare Striking Faces For Thor Hammers

For malleable iron head hammers and split head hammers.

Copper Face

Super Plastic Mallets

High molecular weight polythene mallet heads, suitable for high impact applications. With solid wooden shafts. Heads resistant to abrasion, corrosion and most chemicals.

(Bossing) Pear Shaped