Spare Striking Faces For Thor Hammers

Plastic medium hardness shore D45-55.

Orange - Medium Hard

Spare Striking Faces For Thor Hammers

Easy to change, simply screw in. The striking faces are colour coded to allow easy identification of material type and hardness.

Red

Medium plastic shore D45-55. For light hammering applications.

Thor Soft Faced Hammers

A safer alternative for striking machined surfaces than conventional steel hammers. The impact resistant striking faces shape themselves to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place. The striking faces can be easily replaced once they have become worn. Available as standard, with a choice of 5 interchangeable face types:

Dual Purpose Rawhide and Copper

Malleable iron head with solid wooden handle. The pure electrolytic copper striking face provides a safe high impact blow whilst the rawhide face gives a firm resilient blow that will not mark finished work.

Shaped Rubber Head Hammer Set

Contents: Aluminium alloy hammer head with self locking wooden handle and four shaped rubber striking faces, flat, dome, cone and wedge.

5 Piece Set

Spare Striking Faces For Thor Hammers

Easy to change, simply screw in. The striking faces are colour coded to allow easy identification of material type and hardness.

Grey

Soft PVC shore A63-73. Will not mark finished surfaces.

Laminated Compressed Wood Mallets

Compressed and laminated wooden mallet head with flush fitting glass fibre hoops to prevent the head from splitting.

Spare Striking Faces For Thor Hammers

For malleable iron head hammers and split head hammers.

Plastic Face

Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Nylon Faced Hammer

Kennedy Nylon faced striking hammers have no metal in the hammer faces that can mark the work piece. Each hammer has two replaceable screw-in nylon hammer faces that can be easily replaced when they become worn, without the use of any other tools - minimising down time. The striking faces are reinforced for extra strength and to prevent fracturing from off centre strikes. The nylon hammerheads have a precision moulded screw thread that screws securely into the chrome plate zinc hammerhead, which in turn is fixed to a fully moulded polypropylene shaft with a shock absorbing soft dual material grip, for improved grip and control.
Overall length: 305mm.

For all dimensional specifications please refer to our catalogue.

Pin Ball Pein Hammer

For light applications.

Hickory Shaft

With fine grain, forged steel head, hardened and tempered with polished faces.

Spare Striking Faces For Thor Hammers

For malleable iron head hammers and split head hammers.

Plastic Face