Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

3/8" Square Drive 'P' Type Ratchet (Pre-set)

Designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a Torque Wrench Analyser or similar instrument. Setting system is designed to discourage unauthorised alteration. Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period. With reversible ratchets.

Torque Range: 8-60Nm 5-45ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

Dial Indicating Torque Wrenches

Ideal for use in inspection and quality control, research and development, production and after sales service. Lightweight aluminium handles, abrasive resistant bodies for longer life and easy read dual scale for observing the amount of torque applied throughout the tightening process. Socket not included. Manufactured to ISO 6789 : 1992.

3/8" Square Drive

Torque Range: 8-40Nm 72-360ibf.in

For further specification on this product please see the attached PDF under the additional information tab.

Quick-Set Torque Drivers

Micrometer style adjustment allows easy accurate setting. Slipping action at pre-set torque eliminates over-tightening. The adjustment ring automatically disengages when the tool is in use to prevent accidental adjustment. Stainless steel shafts. Anodised aluminium handles. Suitable for electrical, electronics and instrument assembly works. Manufactured to ISO 6789:1992



Torque Range: 20-120 cNM

For further specification on this product please see the attached PDF under the catalogue PDF links tab.

16mm Spigot End Fittings

Metric

Open End

16mm Spigot End Fittings

Metric

Flare End

1" Square Drive Professional Adjustable Ratchet

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Incorporates "click" sound and "snap" feel to indicate when torque setting has been reached. Non length dependant. Extension handle can be used to reduce operator effort (extension handle supplied as standard with models 800, 1000 and 1500). Fine 60 tooth ratchet allows the wrench to be used in confined areas. Accuracy of +/-3%. *Weight does not include extension handle. Extension handle specification, Length: 700mm, Weight: 1.6kg.

Torque range: 500-1500NM 370-1100ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

Replacement Squares for Torque Wrenches

To suit Kennedy Fixed Head Torque Wrenches

Tri-Torq Torque Wrenches

Tri-Torq wrenches are a unique triangular handle design linear torque wrench, once the preset torque has been reached an audible "CLICK" is emitted. Manufactured from high quality satin finish steel with a polished steel head.

Conforms to BS EN 26789 : 1994 and Federal GGG-W-686 standards.

FXL100 3/8" Drive 20-100Nm Torque Wrench

Torque Range:
20-100Nm/15-75ibf ft

Classic Mechanical Torque Wrenches

Ideal for use in noisy environments. The torque build up can easily be recognised by three signals: Sight - see the wrench start to break; Touch - feel the point of torque; Sound - the ratchet 'click'. Hard wearing mechanism retains +/- 3% accuracy for up to 10,000 operations. Push through square drive connector for instant direction reversal. Easy to read permanent scale with large clear markings that are branded into the handle. Retracting torque adjuster that cannot be altered by accident ensuring accuracy on repetitive operations.

1/2" Square Drive

Torque Range: 25-135Nm 20-100Ibf/ft

For further specification on this product please see the attached PDF under the catalogue PDF links tab.

Angular Torque Gauge

The gauge has an easy to read 360° scale in 2°, 10° & 30° increments and has an Indicator etched into the clear plastic. An adjustable arm to keep the angled scale stationary, with a long and short side for flexibility in positioning against components.