16mm Spigot End Fittings

Inch

Open End

16mm Spigot End Fittings

Metric

Flare End

16mm Spigot End Fittings

Metric

Flare End

Standard 1/4 " A/F Female hexagon socket Torque Limiting Screwdriver

1/4 " A/F Female hexagon socket which will accept screwdriver bits. Can be converted to a Male end by using the appropriate adaptor. Can be pre-set to any torque value within range by using a Torque Calibration Analyser. Can be fitted with 'Impact Free Resetting' option. Range: 6-406cNm. 8ozf.in - 36lbf.in.
Overall length: 200mm.
Weight: 300g.

3/4" Square Drive Professional Adjustable Ratchet

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Incorporates "click" sound and "snap" feel to indicate when torque setting has been reached. Non length dependant. Extension handle can be used to reduce operator effort (extension handle supplied as standard with models 800, 1000 and 1500). Fine 60 tooth ratchet allows the wrench to be used in confined areas. Accuracy of +/-3%. *Weight does not include extension handle. Extension handle specification, Length 700mm, Weight 1.6kg.

Torque Range: 110-550Nm 80-400ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

16mm Spigot End Fittings

Metric

Flare End

3/4" Square Drive Industrial Adjustable Ratchet

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Robust construction gives accurate results to +/-4%. Back break action indicates when specified torque has been achieved and improves accuracy by reducing the possibility of over tightening. With calibration certificate fully traceable and suitable for ISO 9000 assessment purposes. With ratchet.

Torque range: 300-1000Nm 200-750ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

Nut Spinners

Manufactured from hardened and tempered chrome vanadium steel, with satin chrome finish. Oil and acid resistant high impact plastic handles 6?? (150mm), combined socket and blade length. Overall length: 230mm.

Metric

Kennedy 9 Piece Nut Spinner Set

The blades and sockets are manufactured from hardened and tempered chrome vanadium with a polished chrome finish. High impact plastic handles that are oil and acid resistant. The combined length of each blade and socket is 150mm (6") the overall length of each nut spinner is 254mm.

TruTorque TT50 1/2" Sq Dr Torque Wrench 13265

In engineering the new TruTorque range we have paid close attention to accuracy, ease of setting and comfort in use.

Durability has been a primary development goal - both in terms of the lifetime of components and longevity of calibration accuracy. Cycle testing of wrenches at full torque was a key element of the development process and, in total, several million tightening cycles were accumulated. The result is a product that you can use with complete confidence that you have the best tool for the job.



Product's Accuracy: +/-3%
Operates between: 6-35 lbf.ft / 8-50 N.m

Technical Specification;
* Length: 278mm
* Square Size: 1/2"
* Weight: 0.5Kg
* Ratchet Diameter: 30mm
* Engagements per Revolution: 72

* Accuracy: +/-3% of reading exceeds all international standards for torque wrenches. Each wrench is supplied with a traceable calibration certificate.
* Micrometer Scale for simple and error free setting. (On dual scale wrenches, the micrometer increment applies to the N.m scale.)
* Quick and Light Adjustment: adjustment over the entire scale can quickly be achieved and with minimal effort in approximately ten complete turns (exact number varies by model).
* Versatile Ratchets: the tough ratchets are reversible and have narrow engagement angles of 5° to allow easy positioning of the tool in the tight confines of today's vehicles and machines.
* Comfortable, Durable Handle: the handle is constructed using two materials; a base material for strength overlaid with a soft feel grip for comfort and slip resistance.
* Adjustment Lock: all models feature a lock to prevent accidental adjustment of the set torque.