Kennedy Rotary Chemical Dispensing Pump

An easy to operate manual rotary chemical pump that is used to dispense chemicals from a bulk drum into a suitable container. Designed for use with fluids which a regular cast iron or steel barrel pump cannot be used. Pump body is made from glass filled polypropylene with Ryton veins. All seals are from Vitron rubber and all hardware is stainless steel. Strainer fitted at the suction tube inlet stops contaminants from entering the pump. Complete with threaded polypropylene suction tube and a choice of 2" bung adaptors for use on both plastic and metal drums of capacities 15 gallons (50 litres) and 55 gallons (205 litres). For use with water-based fluids, antifreeze, acids, chemicals etc., in addition to all petroleum-based products. Delivery 5 litres (1.3gal. per 20 turns of the handle). Weight 3kg.

DO NOT USE with Acetone, Lacquer, Mineral Oils, Solvents or Turpentine.

Plastic Funnels

With anti-splash rims, removable brass filter, integral handle and rigid offset spout. Diameter: 160mm.

Pump

Polypropylene pump with viton seals. Chemical resistant. Suitable for lubricants, fuels, solvents and non-corrosive liquids. Tube length: 480 - 900mm, Inlet on pump 2" BSP male and female thread.

Piston - PP 190

Metal Oil Cans

Enamel finish, heavy gauge, seamless metal bodied oil cans. With positive force feed brass pumps and valves. Supplied with both rigid metal and flexible nylon threaded spouts.

Metal Oil Cans

Tinplate Oil Supply Cans

With easy pour handles for extra stability, extended spout with chain retained end cap & hinged lid cap.

Pump

Cast iron pump, steel suction tube and spout. Suitable for lubricants and diesel (not anti-freeze). Suitable for container size 200ltr. Tube length: 980mm, Inlet on Pump 2" BSP & M59 x 5 male thread.

Rotary - RP250

Pouring Spouts

Flexible polyethylene, suitable for use with the spouted funnels and measures to allow for easy pouring in awkward areas.

Waste Oil Collection

These items are for the collection of waste oil prior to disposal in accordance with your local authority regulations.

Mobile Waste Oil Drainer

ODB300
This sturdy mobile polyethylene container is for the collection of waste oil draining by gravity from engines/gearboxes. It has a capacity of 30ltr and a float level indicator to let you know when you are nearing its full capacity. The polyamide base is fitted with heavy duty castors and a handle for easy manouverability. The centre shaft is height adjustable from 900 to 1600mm with a 395mm diameter polypropylene drain pan, the pan is fitted with an anti-splash mesh.

Snap Bottom Precision Oil Can

350ml traditional 'style' seamless metal oil can with enamel finish. Invert can and pop the bottom for an exact application. Supplied with 120mm rigid metal spout.

Heavy Duty Liquid Measures

Chemical and oil resistant polyethylene liquid measures. Integral dispensing spout resistant to extreme weather conditions. Can be used in conjunction with dispensing spouts listed below.



Graduations: 1/2ltr - 1/4 & 1/2ltr, 1ltr - 1/4, 1/2, 3/4ltr, 2ltr - 1/2, 1, 1 1/2 & 2ltr, 3ltr - 1, 1 1/2, 2, 2 1/2 & 3ltr, 5ltr - 1, 2, 3, 4 & 5ltr