Plastic Funnels

With anti-splash rims.

Polypropylene Drum Tap

With 3/4" BSP male threads. Both models can be locked into the off position by use of a padlock or locking pin.



Not suitable for petroleum based products.

Spare Spouts to Suit Plastic Oil Cans

Interchangeable

Tin Plate Measures For Oil

Manufactured from 0.3 - 0.6mm gauge British tinplate BS EN 10203 (1991). All sizes stamped with capacity. Soldered joint and handle. Pouring spout for accurate delivery of contents. Ideal for distribution of liquids from bulk storage, recovery of fluids during maintenance and capture of liquids resulting from container damage.

Translucent Dispensing Bottles

Manufactured from oil and chemical resistant polyethylene. With rigid applicator nozzles and sealing caps.

With 25 adjustable brass spout & nozzle

Kennedy Rotary Chemical Dispensing Pump

An easy to operate manual rotary chemical pump that is used to dispense chemicals from a bulk drum into a suitable container. Designed for use with fluids which a regular cast iron or steel barrel pump cannot be used. Pump body is made from glass filled polypropylene with Ryton veins. All seals are from Vitron rubber and all hardware is stainless steel. Strainer fitted at the suction tube inlet stops contaminants from entering the pump. Complete with threaded polypropylene suction tube and a choice of 2" bung adaptors for use on both plastic and metal drums of capacities 15 gallons (50 litres) and 55 gallons (205 litres). For use with water-based fluids, antifreeze, acids, chemicals etc., in addition to all petroleum-based products. Delivery 5 litres (1.3gal. per 20 turns of the handle). Weight 3kg.

DO NOT USE with Acetone, Lacquer, Mineral Oils, Solvents or Turpentine.

Pressol 750ml Trigger Spray Industrial Dispenser

Sprayer head with adjustable and closeable plastic nozzle. Suitable for various chemicals, e.g. detergents, solvents and cleaning agents (not suitable for acetone, glykol, ammonia, break cleaners and acids like formic acid and acetic acid). Stable conical bottle design.

Capacity: 750ml.
HDPE (high density polyethylene).
Colour: Orange.
Height: 290mm.
Base dia: 100mm.
Weight: 0,12kg.

Plastic Funnels

With anti-splash rims, removable brass filter, integral handle and rigid offset spout. Diameter: 160mm.

Pump

Polypropylene pump with viton seals. Chemical resistant. Suitable for lubricants, fuels, solvents and non-corrosive liquids. Tube length: 480 - 900mm, Inlet on pump 2" BSP male and female thread.

Piston - PP 190

Metal Oil Cans

Enamel finish, heavy gauge, seamless metal bodied oil cans. With positive force feed brass pumps and valves. Supplied with both rigid metal and flexible nylon threaded spouts.

Metal Oil Cans