MasterGage Weld Gauges

MasterGage permits quick and accurate measuring of the most popular weld fillet sizes in inch and metric. Excellent for checking alignment and inspection of various angles of welds. High quality stainless steel (SUS 304) blades to resist rust and for longer life. Blades are deburred for fine and smooth edges. All sizes and numerals are laser etched into the surface for clarity and easier reading. Comes in a handy vinyl pocket case with snap lock.

MG-11 Weld Fillet Gauge

Permits quick and accurate measuring of the most popular weld fillet sizes in inch: 1/8" - 1" and metric: 3.2 - 25.4mm. All sizes and numerals are laser etched into the surface for clarity and easier reading. MasterGage welding gauges are intended for general dimensional inspection of welded fabrications where close tolerances are not expected.

Binzel Mig Torch Accessories

003.0013 NOZZLE SPRING MB25

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

Cylinder Adaptors for Side Entry Cylinders

Threaded female one end to connect to a regulator and male on the other end to fit into the gas cylinder. Suitable for side entry cylinders such as Air Products etc.

Cylinder Adaptor 90° Right Hand

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

Murex Process/Heating Nozzles and Adaptors

For heavy duty shanks.

Propane Mixer

Saffire Regulators

With twin bulk head gauges clearly displaying cylinder pressure and flow rate. Comply with EN ISO 2503.
0-4 bar Oxygen (Blue) type is suitable for medium cutting and welding applications.
0-10 bar Oxygen (Blue) type is suitable for most applications including heavy cutting and heating.
A-1.5 Acetylene (Red) type is suitable for all cutting, heating and welding applications.

Series 2 Multi-Stage Regulators

Twin-chambered to deliver constant pressure - even when cylinder is near empty. Citogas Regulators
0-4 bar Oxygen (Blue) type is suitable for medium cutting and welding applications.
0-10 bar Oxygen (Blue) type is suitable for most applications including heavy cutting and heating.
A-1.5 Acetylene (Red) type is suitable for all cutting, heating and welding applications.

Blue Oxygen Hose

Fitted hoses. Kink and crush resistant. 6.3mm for general use, 10mm for heavy duty use.

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

Kennedy Mig Torch Accessories

Compatible with Parweld and Binzel Torches.

Contact Tips & Tip Adaptors