Spark Lighters

For easy and rapid single handed ignition of welding and cutting torches.

Cup Type

Argon & Acetylene Regulators
.

Designed with 2 gauges to indicate cylinder contents and outlet pressure.
Argon regulator outlet gauge is calibrated for
flow 0 - 35lpm. Acetylene regulator has a
calibrated flow rate
of 0 - 1.5 bar
with a full
250 bar
capacity.

Features:
Flow rates up to
80m3/h
(2824 ft3/h)
300 bar
capability.
Features
2 gauges
displaying
cylinder contents
and pressure.

Bottom entry design suited
for top outlet cylinder valves.
Fitted with 1/4? parallel threaded gauges.
Fitted with standard 3/8? BSP outlet.
Fitted with 5/8? BSP inlet connections.

Lightweight Swaged Welding Nozzles

For use with lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 7 types, for use with lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.

Euro Connection Torches

With high performance "Ergo" style handles. Supplied complete with liner and standard size tip. Model MB501DE is only for use with water cooling units (see also page7). Additional styles and full range of spares are available on request.

Oxygen/Acetylene Welding Hose Sets

Oxy Acetylene Oxygen (blue) and acetylene (red). Kink/ crush resistant. 6 and 8mm (general use). 10mm (heavy duty/flame cutting). Supplied fully fitted complete with hose check
valves.

Kennedy Triple Flint Type Spark Lighter (1284)

For easy and rapid single handed ignition of welding and cutting torches. When one flint wears, turn the triangular head to use the next flint.

Murex Saffire MK4 Gas Economiser

The Murex MK4 Gas Economiser is a device that economises the use of gas used in welding operations up to a nozzle size of 25. During nonwelding periods the blowpipe can be hung safely on the hooked lever, which operates the gas shut-off valves in the economiser.

Binzel Mig Torch Accessories

Also compatible with Parweld torches.

Conical Nozzles

Heavy Duty Swaged Welding Nozzles

For use with heavy duty shank.

PVC Welding Curtains

Standard sized curtains provided with 50mm welded seam all around and with snap-fasteners on both sides for joining to obtain total desired width. Supplied with reinforced holes in the upper edge and steel suspension rings. All standard curtains are made of pliable self-extinguishing PVC material with flash point
320 - 390C. Total width of curtains are 10% longer than total required screening length to compensate for folding. Available in dark green, red/orange and bronze transparent colours. Complying with EN1598 for welding (fulfilling requirements on transmittance, reflectance, UV-stability and resistance to ignition).