Binzel MIG Torch Accessories

Also compatible with Parweld Torches.

Liners

PVC coated for use with steel wire. Colour coded to indicate wire size: 0.6 - 0.9mm Blue, 1.0 - 1.2mm Red.

Cutting Nozzles

75mm long acetylene nozzle mix can be used with the majority of popular cutting torches including Saffire 5, 4 & 3, NM250, 400 & 500. Plate thickness refers to mild steel. ASNM: For cutting sheet metal.

Oxy/Fuel Gas Economiser

Allows the gas torch to be held on the hooked arm when not in use which shuts off gas supply to the torch. When unhooked, the torch can be immediately re-ignited from the pilot light without having to re-adjust the valves. Can save up to 50% gas wastage. 3/8” BSP fittings.

Canvas Welders' Curtains

Suitable for shielding workplaces from their surroundings where arc welding processes are used. They are designed to protect people from hazardous radiant emissions from welding arcs and spatter. Welding curtains are not intended to replace welding filters.
Frames supplied separately.

Size: 6'0" x 6'0".

Flame retardant dipped canvas.

Blue Oxygen Hose

Fitted hoses. Kink and crush resistant. 6.3mm for general use, 10mm for heavy duty use.

Saffire XL5 Flashback Arrestors

Give a high flow rate and are equipped with a large cylindrical flame arresting element, an automotive reset non-return valve and a heat sensitive automatic cut-off. Should be used in conjunction with hose check valves.

Lightweight Swaged Welding Nozzles

For use with lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 7 types, for use with lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.

Canvas Welders' Curtains

Suitable for shielding workplaces from their surroundings where arc welding processes are used. They are designed to protect people from hazardous radiant emissions from welding arcs and spatter. Welding curtains are not intended to replace welding filters.
Frames supplied separately.

Size: 8'0" x 6'0".

Flame retardant dipped canvas.

Murex Mig Accessories

Long, Tapered and Parallel nozzles available.

Nozzles

Kennedy Welding Accessories

Kennedy PVC welding curtains comply with EN1598 to block out welding light. The curtains have snap-fasteners on both sides to allow several to be joined together to create the desired width.

Supplied with reinforced holes on the upper edge and steel suspension rings.

PVC Welding Curtains

All Kennedy PVC welding curtains are made of a pliable, self-extinguishing PVC material with a flash point of 320-390C.

Conform to: EN1598 for welding (fulfilling requirements on transmittance, reflectance, UV-stability and resistance to ignition).

Supplied with steel curtain rings.

Available in a range of sizes and colours.