Murex Masterpak Oxy-Acetylene Welding & Cutting Kits

Murex Masterpak cutting and welding kits - one for oxy-propane cutting, one for oxy-acetylene cutting and one combined oxy-acetylene welding/cutting pack. The kits are ideal for construction workers and civil engineers looking for a complete outfit for all maintenance, repair and demolition work. For complete oxy-acetylene welding and cutting capability. If welding capability is not required, users may specify either the oxy-propane cutting kit or the oxy-acetylene version. Again, both these Masterpaks include the renowned Saffire NM 250 Cutter, regulators and flashback arrestors with their inherent levels of safety and performance.

Oxy-Acetylene Cutting Kit (1300005)

Kit contents:
NM cutting torch,
oxygen and acetylene plugged regulators,
XL5 flashback arrestors,
premium hose 10m x 10mm factory fitted with HCV,
ANM 1/16 and 1/8 cutting nozzles,
combination spanner and spark lighter.

ANM Cutting Nozzles

Acetylene nozzle mix can be used with the majority of popular cutting torches. Plate thickness refers to mild steel.

Heavy Duty Swaged Welding Nozzles

For use with heavy duty shank.

ANM Cutting Nozzles

Acetylene nozzle mix can be used with the majority of popular cutting torches. Plate thickness refers to mild steel.

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

PNM Cutting Nozzles

Acetylene nozzle mix can be used with the majority of popular cutting torches. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. Including 1144, 1143, 2010, Saffire 5, 4, 3, NM250, NM400, Citogas HDT200, NMC200. Size 13 suitable for Saffire 4 and 3 only.

Available in 13mm (126809) and 19mm (126810).

A-GNM Gouging Nozzles

PVC Welding Curtains

Standard sized curtains provided with 50mm welded seam all around and with snap-fasteners on both sides for joining to obtain total desired width. Supplied with reinforced holes in the upper edge and steel suspension rings. All standard curtains are made of pliable self-extinguishing PVC material with flash point
320 - 390C. Total width of curtains are 10% longer than total required screening length to compensate for folding. Available in dark green, red/orange and bronze transparent colours. Complying with EN1598 for welding (fulfilling requirements on transmittance, reflectance, UV-stability and resistance to ignition).

Oxygen/Acetylene Cutting Kit

An oxygen & acetylene cutting kit capable of cutting up to 300mm (12").

Contents:
18” - 90º nozzle mix cutting blowpipe.
Single stage 10bar/150psi oxygen plugged regulator.
Single stage 1.5bar/22.5psi acetylene plugged regulator.
Oxygen thermal in-line flashback arrestor.
Fuel gas thermal in-line flashback arrestor.
Anm short nozzles.
Nozzle cleaners.
Cup type spark lighter.
Drop forged combination spanner.
Cup goggle 2" round shade 5 - EN166 & EN175.
Red plastic carry case.
*Requires separate hose set.

040950