Socket Head Button Screws

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - A2 Stainless Steel

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. Dimensions to BS 2470.

Inch (BSW) - Self Colour

Rawl Wedge Anchors

Zinc plated standard type. Provide permanently fixed threaded sockets in concrete. Allows both bolts and threaded rods to be installed and removed without damaging the anchor.

Wedge Anchors (Pk of 100)

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 913.

Metric sizes - Flat Point - Self Colour

For use where parts are frequently reset. This style of point causes the least amount of damage to the component it locks on to. Can be used against hardened shafts, preferably with a ground flat for improved surface contact. Ideal for use as an adjusting screw and in thin wall thicknesses and on soft plugs.

Kennedy Quality Industrial Dowel Pins

Hardened and precision ground. Conform with BS 1804.

Inch

Sizes 1/8" are manufactured from hardened silver steel, 3/16" and above are high quality case hardened mild steel.

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN916.

Metric Sizes - Knurled Cup Point - Self Colour

For quick and permanent location of pulleys, collars and gears on shafts. Will hold fast even in poorly tapped holes. Interrupted profile of clamping face resists loosening due to vibration. Sizes above M6 are generally counterbored to provide maximum clamping efficiency.

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - Self Colour

Socket Head Cap Screws

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - A2 Stainless Steel

Kennedy Extractable Dowels

Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.

Kennedy Professional Threading Inserts

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Threading Inserts (Metric)

Available in packs of 10 and 50.