产品 / 紧固件/工具
编号：QFT6044103D
●产品描述：
Socket Head Button Screws
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners. Dimensions to BS EN ISO 7380.
Metric Sizes - Bright Zinc Plated
编号：QFT6010779H
●产品描述：
Socket Head Cap Screws
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. Dimensions to BS 2470.
Inch (BSW) - Self Colour
编号：QFT6000926F
●产品描述：
Socket Head Cap Screws
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.
Metric Sizes - Self Colour
编号：KEN6206302K
●产品描述：
Kennedy Professional Threading Inserts
Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.
Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.
Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.
For all dimensional specifications please refer to our catalogue.
Wire Threading Inserts (Metric)
Available in packs of 10 and 50.
编号：QFT6067591B
●产品描述：
Socket Head Countersunk Screws
Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.
Inch (UNC) - A2 Stainless Steel
编号：CTL6310674C
●产品描述：
High Tensile Hexagon Head Set Screws
UNF Thread. BS1768. Grade S. Self Colour.
编号：QFT6371445Z
●产品描述：
A2 Stainless Steel - Button Head
A2 Stainless Steel - Button Head
编号：CTL6361004E
●产品描述：
Self Tapping Screws
Self-tapping steel screws. AB zinc-plated. For use on sheet metal and other malleable materials. DIN: 7982 C Z.
PoziDriv - Countersunk (Inch)
编号：RAW6680713A
●产品描述：
Metal
Self-drilling fixings with Pozi No.2 recess. For fixing light objects onto single or double skin plasterboard.
Self-Drive Plasterboard Fixings
Supplied with panhead screws. Must only be used with screws provided.
编号：QFT6040405F
●产品描述：
Socket Head Countersunk Screws
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to DIN7991.
Metric Sizes - Bright Zinc Plated