Round Wire Nails

Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm
(1” to 6”). Available in 500g,
1kg, 2kg and 5kg packs.

Silver-TT? Twin Thread Woodscrews

Ideal for power driving into hard wood, soft wood, MDF and chip-board. High helix double thread, ?drives home? in half the time of standard screws. Precision manufactured, thinner shank reduces wood splitting. Fully heat-treated and extremely hard for high resistance to breakage in high torque applications. Plated to five microns for greater corrosion-resistance. 35 point angle usually needs no pilot hole.

Washers

Single coil square section spring washers. DIN 7980. Self colour.

Inch

N.B. Priced Individually - Standard Box Quantity = 100 Pieces

Round Wire Nails

Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm
(1” to 6”). Available in 500g,
1kg, 2kg and 5kg packs.

High Tensile Hexagon Head Bolts

DIN 931, Grade 8.8.

Metric Sizes - A2 Stainless Steel

UNC HeliCoil Inserts - Free Running

Thread Repair System. Provides effective means of reinforcing and repairing tapped threads. Widely used in automotive and aerospace industries with approvals from British Aerospace, CAA, Fairey, Lucas, MOD, Westland and other recognised organisations.

x1D

A2 Stainless Steel Square Spring Washers

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Conform to DIN 7980.

Metric

N.B. Priced Individually - Standard Box Quantity = 100 Pieces

Rawl Wedge Anchors

Zinc plated lipped type. Provide permanently fixed threaded sockets in concrete. Allows both bolts and threaded rods to be installed and removed without damaging the anchor.

Lipped Wedge Anchors (Pk of 100)

High Tensile Hexagon Head Set Screws

High grade Alloy Steel to BS EN ISO 898 Grade 8.8. Suitable for all high tension applications. DIN 933.

Metric Sizes - Bright Zinc Plated

Kennedy Professional Threading Inserts

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Threading Inserts (BSF)

Available in packs of 10 and 50.