Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - Self Colour

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN916.

Metric sizes - Plain Cup Point - Self Colour

DIN916. For use against hardened shafts. Ideal for use in ductile castings such as zinc, aluminium etc. where high tightening torques are not practical.

Matlock Oval Brad Nails

Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.

A4/316 Stainless Steel Square Section Single Coil Spring Washers

Metric.
DIN 7980.

Socket Head Flange Button Screws

An extra wide flange below the button head makes these fasteners ideal for fixing strips cover plates and sheet metal housings that require a greater load spread. Dimensions to BS EN ISO 898/1 Grade 10.9 DIN 267.

Metric Sizes - Standard Self Colour

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to ANSI B 18.3.

Inch (UNC) - Self Colour

Kennedy Quality Industrial Dowel Pins

Hardened and precision ground. Conform with BS 1804.

Metric

Sizes 3mm are manufactured from un-hardened silver steel, 4mm and above are high quality case hardened mild steel.

Socket Head Button Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners. UNC/UNF Dimensions to ANSI B 18.3. BSW/BA Dimensions to BS 2470.

Inch (BA) - Standard Self Colour

Socket Head Cap Screws

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.

Inch (UNF) - A2 Stainless Steel

Socket Head Button Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners. UNC/UNF Dimensions to ANSI B 18.3. BSW/BA Dimensions to BS 2470.

Inch (UNC) - Standard Self Colour