Qualfast Internal Circlips

Circlips simplify designs and linked with lower installation costs are the ideal item for replacing more traditional fasteners. All are manufactured from carbon steel with a phosphate finish. External DIN 472.

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 915.

Metric sizes - Dog Point - Self Colour

For permanent location of one part to another. The point is generally centre spotted and a location hole drilled in the shaft or ground flat where location is made.

Nyloc Nuts

Zinc plated. Shakeproof. Available in Type P Metric (conforms to DIN 982) and Type T Metric (conforms to DIN 985).

Metric Type P

Socket Set Screws

High tensile alloy steel. Grade 14.9. BS 2470. For quick and permanent location of pulleys, collars and gears on shafts. Will hold fast even in poorly tapped holes. Interrupted profile of clamping face resists loosening due to vibration. Sizes above 1/4? are generally counterbored to provide maximum clamping efficiency.

Inch (BA) - Knurled Cup Point - Self Colour

Kennedy Thread Repair

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Thread Insert Kits (Metric)

Each Kennedy Professional Thread Repair Wire Insert Kit is supplied complete with a Hand Tap, Inserting Tool and Inserts.

Plastic Plugs

All-purpose cost effective fixing for medium and lightweight
applications in sound brickwork, blockwork etc.
Typical Applications:
Fixing central heating pipes, shelving, brackets, dado rails
and other woodwork. Securing light wall units and kitchen fittings.
Features:
1. Profiled body for extra grip.
2. Anti-rotation fins.
3. 3 colour-coded sizes for screws from 3-6mm (No.4-14).
Additional sizes for screws No.4-20.



Product Specification:
Desc. Screw size Length Hole dia. Box
Green 3-4.5 (No. 4- 8) 20 4.5 - - - 67-008
Pink 3.5-5 (No. 6-10) 25 5.5 - - - 67-012
Orange 4.5-6 (No. 8-12) 25 6.5 - - - 67-016
Grey 4.5-5 (No.8-10) 35 5.5 - - - 67-020
White 4.5-6 (No. 8-12) 35 6.5 - - - 67-024
Blue 5-6 (No.10-14) 35 8.0 - - - 67-028
Yellow 8-10 (No.16-20) 50 11. - - - 67-032
Clips carded or uncarded.
Yellow 3-5 (No. 4-10) 25 5 - 67-125 67-126
Red 3.5-5.5(No. 6-12)35 6 - 67-130 67-134
Brown 5-6 (No.10-14) 45 7 - 67-231 67-233

Round Wire Nails

Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm
(1” to 6”). Available in 500g,
1kg, 2kg and 5kg packs.

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to ANSI B 18.3.

Inch (UNC) - Self Colour

High Tensile Hexagon Head Bolts

BSW Thread. BS1083. Grade R. Self colour.

Inch (BSW) - Self Colour

Socket Head Countersunk Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to DIN7991.

Metric Sizes - Standard Self Colour