Indexa-Seiki SL - Sidelock Adaptors

For Weldon shank cutters, adaptors and tapping chucks. Manufactured to stringent quality standards.

Standard Length

To DIN69871/A

Granlund HSS Size 1 Counterbores

Type W. HSS. Tolerence P8.

Counterbores W with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.

For further specifications please refer to our catalogue.

Granlund Size 1 Insert Drills

Type B HSS Tol. h8 flute 25mm.

When combining insert drills with countersinks, the drill must break through the work piece before secondary cutting commences and must not be used for blind holes.

For all technical specifications please refer to our catalogue.

Indexa-Seiki VDI Toolholders

Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.

E2 Boring Bar Holders

Granlund Size 1 Pilots

Type R Roller. c9.

When working ?dry? type R roller pilots must be lubricated. Pilots type RS must be combined with holders type AS.

For all technical specifications please refer to our catalogue.

Kennametal Indexable End Mill

The Kennametal range of Mill-1-10 are a range of 3D-Pocket Milling & Plunging Cutters.

Typical Applications:
Circular contour milling ID & OD
Full Slotting
Face and square shoulder milling
Profile milling
Circular face milling
Helical interpolation ramping into full material
Full slotting trochoidal

Features:
Inserts with integrated wiper facet.
Perfect ramping up to 9.5 and true 90.
Balancing cutting load to minimise vibrations and reduce spindle power.

Benefits:
One insert type to reduce inventory costs.
Higher feed rates. Spindle protection. Less spindle power consumption.
Perfect performance with circular ramping into full material - can replace drilling.
Increased productivity and soft cutting action in contouring and full slotting.
Reduced machining time in roughing operations.
Excellent performance and increased tool life in finishing applications.

Mill-1-10 Indexable End Mill

Granlund Carbide Size 1 Counterbores

Type HA. Carbide K10 micrograin. Tolerance P8.

For further specifications please refer to our catalogue.

Indexa-Seiki FM - Face Mill Adaptors

From an extensive programme of quality spindle nose tooling, used with an extensive range of face and shell mills

Dijet Mirror Ball Cutter Inserts

Available in several grades.

For further specifications please refer to our catalogue.

BNM

Allied Maxcut Series 3 Holders

Diameter range: 34.34 to 47.80mm.

For all dimensional specifications please refer to our catalogue.

Taper Shank