产品 / 切削工具 / 数控刀具&附件
编号：GRA1513011F
●产品描述：
Granlund Size 1 Insert Drills
Type B HSS Tol. h8 flute 25mm.
When combining insert drills with countersinks, the drill must break through the work piece before secondary cutting commences and must not be used for blind holes.
For all technical specifications please refer to our catalogue.
编号：GRA1513318F
●产品描述：
Granlund Carbide Size 1 Counterbores
Type H. Carbide K40 micrograin. Tolerance P8.
Counterbores H with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.
For further specifications please refer to our catalogue.
编号：IDX1449316K
●产品描述：
Indexa-Seiki Tapping Collets
Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.
For all technical specifications please refer to our catalogue.
DIN SZ2
编号：ISC1394535C
●产品描述：
Iscar Helido Indexable Endmills and Facemills
The new HELIDO H490 ANKX rectangular inserts have 4 helical right-hand positive cutting edges. They were designed in cutting edge lengths of 9, 12 and 17 mm. Insert construction is very thick and strong; clamped into a dovetail inclined pocket which provides a very rigid clamping and has a wiper which leaves an excellent surface finish.
Due to its strong construction, unique chip deflector with positive cutting angles and excellent grade combinations, this new family features high durability, low cutting forces and long tool life. Our most advanced SUMO TEC grades ensure excellent performance and reliability.
The new HELIDO tools can be used for machining steel, stainless steel and cast iron at very high machining parameters. HELIDO"s state-of-the-art of milling insert design, enables excellent performance and extremely high productivity.
H490 - A new family of double-sided inserts with 4 helical cutting edges.
For further specification on this product please see refer to our catalogue page.
H490 E90AX...-09 Indexable End Mills
End Mills with double-sided inserts, diameter range 16-40mm.
编号：AME1841601B
●产品描述：
Allied Maxcut Thread Mills
The MaxThread™ threadmill range is manufactured from solid carbide with ground helical flutes and a TiAlN coating as standard. These product have been designed for the low volume/low cost production environment, providing excellent performance at a competitive price. A helical flute design has been maintained across the MaxThread™ range to allow
for maximum production benefits and to negate the need for straight flute thread mills. A comprehensive range of thread forms and technical information further supports the programme.
Features and Benefits:
Helical flute which offers increased strength and rigidity when cutting forces are applied.
TiAlN coated for increased tool life over uncoated tools.
Extensive range of thread forms.
High quality for consistent predictable production.
NPT Thread Mills
Solid Carbide Threadmills NPT TiAIN coated
编号：GRA1513330A
●产品描述：
Granlund Carbide Size 1 Counterbores
Type H. Carbide K40 micrograin. Tolerance P8.
Counterbores H with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.
For further specifications please refer to our catalogue.
编号：IDX1449168K
●产品描述：
Indexa-Seiki Tapping Collets
Rigid type. To suit Indexa-Seiki Rigid type tapping chucks.
For all dimensional and technical specifications please refer to our catalogue.
DIN SZ2
编号：IND1482830K
●产品描述：
Indexa-Seiki VDI Toolholders
Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.
E2 Boring Bar Holders
编号：GRA1513578J
●产品描述：
Granlund Size 1 Insert Drills
Type LB HSS Tol. h8 flute 40mm.
When combining insert drills with countersinks, the drill must break through the work piece before secondary cutting commences and must not be used for blind holes.
For all technical specifications please refer to our catalogue.
编号：PNZ1441710K
●产品描述：
Pinzbohr Standard Arbors
A comprehensive flexible boring system available for use on the majority of conventional and CNC machines.
BT MAS 403
PNZ-144-1200K/PNZ-144-1240K/PNZ-144-1280K/PNZ-144-1780K and PNZ-144-1820K are the preferred Arbors for 'MICRO' Series Heads.