产品 / 切削工具 / 数控刀具&附件
编号：IDX1449344K
●产品描述：
Indexa-Seiki Tapping Collets
Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.
For all technical specifications please refer to our catalogue.
ISO529 SZ2
编号：IDX1443860K
●产品描述：
Indexa-Seiki ER - Single Angle Collets
Collet Dimensions:
Capacity 2.0-20.
(D)33mm x (L)40mm.
ER32
编号：IND1443056K
●产品描述：
Indexa-Seiki SL - Sidelock Adaptors
For Weldon shank cutters, adaptors and tapping chucks. Manufactured to stringent quality standards.
Standard Length
To DIN69871/A
编号：IND1443596K
●产品描述：
Indexa-Seiki R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Available in bore sizes:
Metric: 3, 6, 8, 10, 11, 12, 14, 16 and 20mm.
Inch: 1/4, 3/8, 1/2, 5/8/ 3/4 and 7/8??.
编号：IND1445596K
●产品描述：
Indexa-Seiki R8 Shank Morse Adaptors
R8 shank morse adaptors
Morse Taper Adaptor
编号：IDX1449220K
●产品描述：
Indexa-Seiki Tapping Collets
Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.
For all technical specifications please refer to our catalogue.
DIN SZ1
编号：IND1394900K
●产品描述：
XP-90C Weldon End Mills
Positive 90 approach milling cutter, using size 10/16 inserts allowing depth passes and high feed per teeth. Torx screw allows for good chip ecacuation. Plasma Ion coating offers longer tool life and greater hardness that is more resistant to wear. Through coolant as standard.
XP-90C End Mills For AP_T 10 Inserts
编号：IND1482760K
●产品描述：
Indexa-Seiki VDI Toolholders
Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.
E2 Boring Bar Holders
编号：IND1393480K
●产品描述：
Indexa-Seiki? "Tri Square" Milling Cutters
Uses top clamping triangular inserts to produce a 90 shoulder at the edge of a milled face. This is of major benefit when taking a number of cuts across a face as the shoulder produced is without steps.
编号：IDX1449352K
●产品描述：
Indexa-Seiki Tapping Collets
Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.
For all technical specifications please refer to our catalogue.
ISO529 SZ2