产品 / 切削工具 / 数控刀具&附件
编号：IND1409250K
●产品描述：
Indexa-Seiki Standard Pull Studs
BT-MAS 403
编号：IDX1444040K
●产品描述：
Indexa-Seiki ER - Single Angle Collets
Collet Dimensions:
Capacity 3.0-26.
(D)41mm x (L)46mm.
ER40
编号：IND1397680K
●产品描述：
XP-45C 'Face Hog' Milling Cutters
Super Positive 45° approach milling cutter, angle decreases cutting forces and allows a quick feed in a limited capacity machine. Clamp style insert pocket with shim seats to protect the body in case of accident. Uses SEKN/R 1203 AF_N inserts. Plasma Ion coating offers longer tool life and greater hardness that is more resistant to wear. Through coolant as standard.
编号：IDX1440776K
●产品描述：
PSC and PSCa (adjustable) Collets for Plain Shank Cutters
Tru-Loc Collets are available for plain shank cutters in two different styles, PSC non adjustable and PSCa - Collets with an adjustable back-stop screw to allow more accurate & consistent cutter replacement.
For all dimensional specifications please refer to our catalogue.
PSC Type
编号：IDX1449314K
●产品描述：
Indexa-Seiki Tapping Collets
Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.
For all technical specifications please refer to our catalogue.
DIN SZ2
编号：IND1409243K
●产品描述：
Indexa-Seiki Standard Pull Studs
BT-MAS 403
编号：IND1445048K
●产品描述：
Indexa-Seiki JTA - Jacobs Taper Adaptors
For use with Kennedy, Jacobs, Rohm etc, drill chucks.
To DIN69871/A
编号：IND1448610K
●产品描述：
Indexa-Seiki Tapping Chucks - Tension & Compression Type
With axial compensation. Suitable for use on boring machines and machining centres. To MAS 403 BT Taper Shank.
For all technical specifications please refer to our catalogue.
MAS 403 BT Taper Shank
编号：IND1394900K
●产品描述：
XP-90C Weldon End Mills
Positive 90 approach milling cutter, using size 10/16 inserts allowing depth passes and high feed per teeth. Torx screw allows for good chip ecacuation. Plasma Ion coating offers longer tool life and greater hardness that is more resistant to wear. Through coolant as standard.
XP-90C End Mills For AP_T 10 Inserts
编号：IND1483030K
●产品描述：
Indexa-Seiki VDI Toolholders
Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburised and hardened. Surface hardness of 58 - 60HRC. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.
E2-1 Boring Bar Sleeves