Kennedy® Mini ISO Magnetic Cylinders

According to the European Standard CETOP RP52-P and DIN/ISO 6432. Fixed mechanical cushioning has been fitted as standard in order to reduce wear by high impact loads at very high speeds. Flanged construction. Operating temperature: 0°C - 80°C (with dry air -20°C). No Load Speed: 10 - 1000mm/sec. 1 - 10bar Pressure.

Series R3M - Double Acting

Pressure Line Filter Elements

The selection of the perfect filtration solution contributes significantly to prevent damage caused by contamination whilst increasing productivity and reducing maintenance costs. The new filter element technology used in Betamicron4, has been specially developed to ensure sensitive components are protected, whilst the filter element has a significantly longer service life providing a high level of cleanliness and long-term stability for your hydraulic or lubrication systems.

Type D/DN - Pressure Line Type

Plunger Vale

Technical Specifications:
Valve group 3-way/2-position
Construction Poppet type
Mounting On consoles
Material Anodized body, Brass poppet gate, Buna-N seals, nickel-plated brass plungers
Threaded port sizes M5 (10-32 UNF) thread, or 4 mm O.D. cartridge (5/32" O.D. tube connect)
Installation Bulkhead, or single panel mount
Operating temperature 32°F - 175°F, (dry air necessary down to -4°F)
Fluid Filtered air (25 micron or less recommended)
Lubricant Not required; otherwise, only oil compatible with Buna-N, (3° - 10° E), (ISOVG 32 grade; 32 centistrokes)

Pneumatic Data:
Operating pressure 2 - 10 bar (30 - 145 psi)
Nominal pressure 6 bar (87 psi)
Nominal flow *Qn = 60 NL/min. (2.12 SCFM)
Nominal diameter 2.5 mm
Cv Rating 0.06

Dies to suit MCX20-HP

Product Number: 8000-10193
For hose size 5/8".

SMC Pneumatic Fittings



MGP Series Compact Guide Cylinder

Possible piping from two directions. Two types of guide rod bearing to accommodate various applications (Slide bearing,
Ball bearing). Auto switches can be mounted.

Compact guide cylinder
Bearing Type: Slide bearing
Bore size: 12mm
Cylinder stroke: 10mm

For further specification on this product please see the attached PDF under the additional information tab.

Series AR Standard

Part of SMC's new modular FRL system.
Locking handle as standard.
Set pressure range (Mpa): 0.05 - 0.85.

We supply the complete range
of SMC Fluid Power Products.
K = Built-in Check
Valve.
E = Built-in Gauge

Air Regulators

Series AR Standard

Part of SMC's new modular FRL system.
Locking handle as standard.
Set pressure range (Mpa): 0.05 - 0.85.

We supply the complete range
of SMC Fluid Power Products.
K = Built-in Check
Valve.
E = Built-in Gauge

Air Regulators

Mounting Accessories

Female Rear Clevis

Series 32 Compact Magnetic Cylinders

Double Acting.
Standard ISO 21287.
Stainless steel rod.
Anodized aluminium extrusion.
Cast aluminium End Blocks.
Double Acting Stroke min-max Ø 20-25 : 510-500mm, Ø 20 : 10-500mm, Ø 25 : 10-500mm.
Bores: Ø 16, 20, 25.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure:
1 to 10 bar (Double-acting).
2 to 10 bar (Single-acting).
Speed: 10 to 1000mm/sec (no load).

Series 32 Compact Magnetic Cylinders

Double Acting.
Standard ISO 21287.
Stainless steel rod.
Anodized aluminium extrusion.
Cast aluminium End Blocks.
Double Acting Stroke min-max Ø 20-25 : 510-500mm, Ø 20 : 10-500mm, Ø 25 : 10-500mm.
Bores: Ø 16, 20, 25.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure:
1 to 10 bar (Double-acting).
2 to 10 bar (Single-acting).
Speed: 10 to 1000mm/sec (no load).