Kennedy® Mini ISO Magnetic Cylinders

According to the European Standard CETOP RP52-P and DIN/ISO 6432. Fixed mechanical cushioning has been fitted as standard in order to reduce wear by high impact loads at very high speeds. Flanged construction. Operating temperature: 0°C - 80°C (with dry air -20°C). No Load Speed: 10 - 1000mm/sec. 1 - 10bar Pressure.

Series R3M - Double Acting

Kennedy® Ultra-Power Cylinders

Double acting pneumatic cylinder. Non-lube. Adjustable end cushioning. Diameter: 32mm-100mm. Magnetic piston as standard. ISO 6431 VDMA 24562.

Kennedy® Electronic Auto Drain Valve

Electronic timer for ultimate reliability. Adjustable interval and discharge times. Self cleaning valve needs no maintenance. LED indicators show operational status. Impulse test button. Supplied un-branded with full instructions - ideal for distributors. Includes tamper proof kit. Failure to carry out routine draining of compressed air systems can cause serious damage to 'downstream' components such as valves, cylinders and control systems. The Auto Drain Valve eliminates the risk of this potentially expensive problem by providing regular automatic condensate drainage. A special electronic timer is coupled to a purpose built self cleaning solenoid valve. The complete unit requires only a simple installation procedure. Once fitted the unit can be set with a variety of interval and discharge times to suit the particular compressed air system requirements. The unit is suitable for air, neutral gas and contaminated liquid discharge.

Specifications:
Electronic Timer:
Power on LED.
Valve open LED.
Interval time: 0.5 to 45 min.
Discharge time: 0.5 to 10 sec.
Solenoid valve: 0 to 16 bar.
Function: 2/2 NC.
Port connections: G3/8.
Main pressure range: 0-16 bar max.
Filtration: Strainer recommended.
Temperature range: Ambient -10°C to 50°C, Media -10°C to 140°C.
Lubrication: Not required.
Media: Air, gases, non-corrosive liquids.
Timer and solenoid valve assembly.
Electrical data: AC 220V, 50Hz,19W, AC 110V, 50Hz, 28W. Insulation: Class H 180C.
Protection: IP65 (with connector).
Temperature range: -10°C to +140°C.
Materials: Solenoid valve.
Tube and plunger: stainless steel.
Spring: stainless steel.
Body: brass.
Seals: Buna.

Kennedy® Mini ISO Magnetic Cylinders

According to the European Standard CETOP RP52-P and DIN/ISO 6432. Fixed mechanical cushioning has been fitted as standard in order to reduce wear by high impact loads at very high speeds. Flanged construction. Operating temperature: 0°C - 80°C (with dry air -20°C). No Load Speed: 10 - 1000mm/sec. 1 - 10bar Pressure.

Series R3M - Double Acting

Kennedy® Mini ISO Magnetic Cylinders

According to the European Standard CETOP RP52-P and DIN/ISO 6432. Fixed mechanical cushioning has been fitted as standard in order to reduce wear by high impact loads at very high speeds. Flanged construction. Operating temperature: 0°C - 80°C (with dry air -20°C). No Load Speed: 10 - 1000mm/sec. 1 - 10bar Pressure.

Series R3M - Double Acting

Kennedy® Coils for Solenoid Valves

DIN 43650/B. For use with solenoid valves. IP54. Nominal Size: 22mm. Terminal Pins: 2-Pole + earth.

Kennedy® Air Actuated Spool Valves - KVF

General purpose spool valves. Media Compressed air and compressed gases. Mounting - body ported, manifold or through endcaps.
Materials:
Body & Spool: aluminium.
Seals: nitrile.
Endcaps: Glass filled polyester.
Seal spacers: PPS.

Kennedy® Horizontal Rear Hinges

Available in cylinder diameters of 32mm, 40mm, 50mm, 63mm, 80mm and 100mm.

Kennedy® Solenoid Actuated Spool Valves - KVR

General purpose spool valves. Media compressed air & neutral gases. Mounting - body ported, manifold or through endcaps.
Materials:
Body & spool: aluminium.
Seals: nitrile.
Endcaps: glass filled polyester.
Seal spacers: PPS.

Kennedy® Piston Rod Clevis Mountings

For (Mini) ISO 6432 and ISO 6431/VDMA 24562 cylinders.

Mini ISO