Kennedy® Mini ISO Magnetic Cylinders

According to the European Standard CETOP RP52-P and DIN/ISO 6432. Fixed mechanical cushioning has been fitted as standard in order to reduce wear by high impact loads at very high speeds. Flanged construction. Operating temperature: 0°C - 80°C (with dry air -20°C). No Load Speed: 10 - 1000mm/sec. 1 - 10bar Pressure.

Series R3M - Double Acting

Kennedy® Air Lubricator Units

Adjustable, constant oil flow. Integral mounting provision. Use individually or as part of a combination unit.
Temperature range: -10°C to +60°C.
Max input pressure: 10 bar.
Body: Technopolymer.
Bowl: Polycarbonate with protector.
Recommended oil: ISO VG32 (Servo System 32).

Kennedy Air Lube Oil

Excellent air release quality, low foaming ability and resists clogging. Contains anti-rust and anti-wear additives. Extremely resistant to water absorption and can be mixed with all mineral oil-based lubricants without draining the system. Can be used on all air tools. ISO Grade VG22.

Kennedy® Ultra-Power Cylinders

Double acting pneumatic cylinder. Non-lube. Adjustable end cushioning. Diameter: 32mm-100mm. Magnetic piston as standard. ISO 6431 VDMA 24562.

Kennedy® Ultra-Power Cylinders

Double acting pneumatic cylinder. Non-lube. Adjustable end cushioning. Diameter: 32mm-100mm. Magnetic piston as standard. ISO 6431 VDMA 24562.

Kennedy® Mechanically Actuated Spool Valves - KVL

Sizes available 1/8" and 1/4".

Kennedy® Horizontal Rear Hinges

Available in cylinder diameters of 32mm, 40mm, 50mm, 63mm, 80mm and 100mm.

Kennedy® Rear Clevis Male

Available in cylinder diameters of 32mm, 40mm, 50mm, 63mm, 80mm and 100mm.

Kennedy® Horizontal Rear Hinges

Available in cylinder diameters of 32mm, 40mm, 50mm, 63mm, 80mm and 100mm.

Kennedy® Clevis and Pin

Available in cylinder diameters of 32mm, 40mm, 50mm, 63mm, 80mm and 100mm.