Bosch Rexroth Pneumatic Fittings

Cylinder, ISO 15552, series PRE.
Available in a range of piston diameters: 32-125mm
Ports: G 1/8 ? G 1/2
Double acting with magnetic piston and cushioning: elastic.
Integrated rear eye, piston rod with external thread.

For further specification on this product please see the attached PDF under the additional information tab.

PRE Series Piston Rod Cylinders

For further specification on this product please see the attached PDF under the additional information tab.

AL Series Lubricators

Part of the modular FRL system they provide precise adjustment of inline lubricant, atomising over 97% oil particles at 10 microns to ensure uniform lubrication even at extremely low flow rates. A sight dome allows for visual setting and the built-in check valve prevents oil falling back into bowl during no air consumption which could cause 'dry period' running.

AL Series

Shock Absorbers

Automatic adjustment to the most appropriate absorption performance. High resistance to load deviation. Double seal enclosure.
Collision speed (m/s): 0.05 to 5.0.

SMC Pneumatic Fittings

The C85 series conforms to ISO 6432 and CETOP RP52P. The C85 is available in bore sizes 8mm through 25mm with standard strokes ranging from 10mm through 300mm. A unique rod packing design prevents entry of dust and the effectiveness of the seal is such that the C85 is suitable for use in extremely dusty environments. With abrasion resistant outer and replaceable nose seals, the C85 offers exceptional service life.

For further specification on this product please see the attached PDF under the additional information tab.

C85 Series ISO Single Rod Standard Cylinder

Filtermist Filters

Filter Roll Media
For filtering machine tool coolants and cutting and lubricating fluids found throughout the metalworking industry. To suit most flat bed filter boxes. Length: 100m

Vicose Paper Filter Rolls

Shock Absorbers

Automatic adjustment to the most appropriate absorption performance. High resistance to load deviation. Double seal enclosure.
Collision speed (m/s): 0.05 to 5.0.

Pressure Line Filter Elements

The selection of the perfect filtration solution contributes significantly to prevent damage caused by contamination whilst increasing productivity and reducing maintenance costs. The new filter element technology used in Betamicron4, has been specially developed to ensure sensitive components are protected, whilst the filter element has a significantly longer service life providing a high level of cleanliness and long-term stability for your hydraulic or lubrication systems.

Type R - Return Line Type

Series MC

The filter regulators Series MC are available with ports G1/4, G3/8 and G1/2. They combine the features of the filters and regulators and have smaller overall dimensions than the two separate components.

General Data
Construction compact modular with filtering element in HDPE diaphragm type
Materials: zama, NBR, technopolymer.
Ports: G1/4 G3/8 G1/2.
Condensate capacity cm: 28, 72, 72.
Weight. 0.443 0.948 0.928kg.
Pressure gauge ports: G1/8.
Mounting: vertical in-line or wall-mounting.
Operating temperature: 0C to 50C at 10 bar.
Porosity of filtering element: 25um standard - 5um upon request.
Draining of condensate: manual - semi-automatic standard.
Finishing: enamelled.
Inlet pressure with standard drain and protected depressurisation: 0.3 - 16 bar with depressurisation, 0.3 - 10 bar with automatic drain, 1.5 - 12 bar for G3/8 and G1/2.



Size: G3/8-G1/2.
Ports: G3/8.
Drain type: manual semi-automatic, self-relieving.
Working pressure: 0,5 10.

Kennedy® Air Actuated Spool Valves - KVF

General purpose spool valves. Media Compressed air and compressed gases. Mounting - body ported, manifold or through endcaps.
Materials:
Body & Spool: aluminium.
Seals: nitrile.
Endcaps: Glass filled polyester.
Seal spacers: PPS.

Pneumatically Operated Valves

Series: 3
Function: 3/2
Port: 1/4
Actuation - Return: Pilot Pilot

Pneumatically Operated Valve - Pilot Pilot
Series: 3
Function: 3/2
Port: 1/4
Actuation - Return: Pilot Pilot