产品 / 切削工具 / 数控刀片
编号：ISC1316943K
●产品描述：
ISCAR?s new Single-Ended Insert for Parting With an Improved Clamping Method
TAG Insert Features
* Very rigid clamping in a tangentially oriented pocket.
* Enables machining at very high feed rates and provides excellent straightness and surface finish.
* Recommended for parting large diameter parts and for * Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications.
* The combination of tangential clamping and free chip flow results in improved tool and insert life time.
* Provides a solution to the problem of inserts being pulled out during retraction.
The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.
Tang-Grip? TAG R/L-C Parting & Grooving Inserts
First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.
IC830 Grade Description:
(P20-P50/M20-M40/K15-K40/ S15-S40) PVD TiAlN coated tough grade followed by a special SUMO TEC surface treatment. Suitable for milling stainless steel, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.
编号：KML1134770P
●产品描述：
Kennametal Indexable Turning Inserts
Grade Description: KC850 grade is equivalent to the following grades M25-M45, P25-P45. A tri-phase coating on an extra strong, cobalt-enriched substrate makes this Kennametal CNMG insert suitable for general purpose machining of many work piece materials. With the advent of higher machine tool spindle speeds, today it finds its best application in heavy cutting of low, medium, and high carbon steels, as well as medium hardness alloy and tool steels. Excellent thermal and mechanical shock resistance makes grade KC850 ideally suited for difficult applications with interruptions.
For all technical specifications and tool holders please refer to our catalogue.
编号：MTS1200910R
●产品描述：
Mitsubishi Indexable Turning Inserts
Grade Description: US735 (P20 - 40)
CVD Coated Grade. Specially designed for both interrupted and uninterrupted machining of materials that are subject to work hardening, such as stainless steels, where a sharper cutting edge produces more desired results
CNMG Indexable Turning Insert
Chip Breaker: MA - Light roughing and general purpose cutting. Suitable for various cutting conditions and materials.
Depth of cut: .040 - .240
Feed Rate: .008 - .240
编号：YML1207440B
●产品描述：
TNMA
QX505 (ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.
编号：SNK1206532V
●产品描述：
Sandvik CoroKey Indexable Turning Inserts
Suitable for External/Internal Toolholders.
TCMT Turning Insert
编号：MTS1201970T
●产品描述：
Mitsubishi Indexable Turning Inserts
UE6110 (P05-P25)
The first recommendation for steel turning. Suitable for turning various types such as mild steel, carbon steel, bearing steel and lead free steel. High Crater Wear Resistance and High Flank Wear Resistance.
DNMG Indexable Turning Insert
Chip Breaker: MA - Light roughing and general purpose cutting. Suitable for various cutting conditions and materials.
Depth of cut: .040 - .240
Feed Rate: .008 - .240
编号：SUM1203088B
●产品描述：
AC3000 Carbide Grade (P20 - P40, M20 - M40)
Al2O3 Coated Grade
Designed for interrupted cuts of steels and stainless.
NUP Chipbreaker
Application: optimised machining.
编号：SNK1202393E
●产品描述：
DNMG
Suitable for External/Internal Toolholders.
编号：ISC1316826R
●产品描述：
ISCAR?s new Single-Ended Insert for Parting With an Improved Clamping Method
TAG Insert Features
* Very rigid clamping in a tangentially oriented pocket.
* Enables machining at very high feed rates and provides excellent straightness and surface finish.
* Recommended for parting large diameter parts and for * Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications.
* The combination of tangential clamping and free chip flow results in improved tool and insert life time.
* Provides a solution to the problem of inserts being pulled out during retraction.
The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.
Tang-Grip? TAG R/L-J/JS Parting & Grooving Inserts
First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.
IC830 Grade Description:
(P20-P50/M20-M40/K15-K40/ S15-S40) PVD TiAlN coated tough grade followed by a special SUMO TEC surface treatment. Suitable for milling stainless steel, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.
编号：SNK1208247D
●产品描述：
VBMT
Suitable for External Toolholders.