产品 / 切削工具 / 数控刀片
编号：SNK1202023N
●产品描述：
DCMT
Suitable for External/Internal Toolholders
编号：SNK1204016M
●产品描述：
KNUX
Suitable for External Toolholders.
编号：YML1200223A
●产品描述：
CCGT
QX500 (ISO P10-P25) Cermet. For high speed finishing and light roughing. Will maintain a high class surface finish. Mainly used on steels and can be applied to finishing some Stainless steels and Cast Irons.
编号：SNK1200554F
●产品描述：
CCMT
Suitable for External/Internal Toolholders
编号：TSH1168246T
●产品描述：
WNMG Indexable Turning Inserts
T9015 (ISO P10-P20, M10-M20, K10-K20) MT-CVD coated. New "Double-Bridge" coating technology with increased wear resistance allowing for higher cutting conditions. Universal grade for medium turning of steel at medium speed. TM-Medium operation chipbreaker.
编号：YML1200263D
●产品描述：
CCGT
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
编号：KML1133965F
●产品描述：
Kennametal Milling Inserts
The Kennametal insert grade KC725M (ISO M15-M35, P15-P35, K15-35) is a multi-layer PVD coating with a tough 11.5% cobalt substrate. General purpose medium-speed grade for milling steel, stainless steel, and ductile cast iron. Good resistance to thermal shock. Suitable for wet and dry machining applications. Speed range: 300 - 650 SFM on steel materials; 200 - 500 SFM on stainless steel materials.
For all technical specifications please refer to our catalogue.
APKT 1003PDR-IT KC725M Milling Insert
编号：KML1134869M
●产品描述：
Kennametal KC8050 Indexable Turning Inserts
(P30, M30, K30 CVD coated). This grade, offers a well-balanced toughness and due to a special design of the coating, a good deformation and wear resistance. The polished edge geometry is the basis for its multi-range application, in particular in stainless and high temperature steels. For machining steel and cast materials with forging or casting skins.
DNMG
编号：YML1209404E
●产品描述：
VNMG Indexable Turning Inserts
QX530 (ISO P20-P40 M20-M30) Coated. Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
Suitable for External Toolholders
编号：ISC1153683C
●产品描述：
Iscar Turning Inserts
IC20 (K10-K20).
Uncoated carbide grade for grey cast iron over 220HBN, malleable cast iron, silicon aluminum, copper alloys. fibre reinforced plastics (FRP) phenolic laminates, stone, wood, stainless steel and high-temp resistant alloys. Suitable for Finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. High wear resistance.
VNMG