产品 / 动力工具 & 磨料磨具 / 电动工具附件
编号：TRE2877082T
●产品描述：
Trend HSS Snappy Drill Countersinks - SNAP/CS
Snappy drill-countersinks have 1/4" hex shanks with ball retainer recess for use in quick release bit adaptors or 3-jaw chucks. Heat treated tool steel countersink and HSS drill. Adjustable for different length screws and can produce a counterbored hole for standard size wood plugs. The drill produces pilot holes only.
Drill Diameter; 9/64" (No.12 Screw)
编号：TRE2873318B
●产品描述：
Trend Router Cutters
To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.
Two Flute Rounding Over Bits
编号：TRE2877082P
●产品描述：
Trend HSS Snappy Drill Countersinks - SNAP/CS
Snappy drill-countersinks have 1/4" hex shanks with ball retainer recess for use in quick release bit adaptors or 3-jaw chucks. Heat treated tool steel countersink and HSS drill. Adjustable for different length screws and can produce a counterbored hole for standard size wood plugs. The drill produces pilot holes only.
Drill Diameter; 1/8" (No.10 Screw)
编号：TRE2872675F
●产品描述：
Router Cutters
Cuts cleanly without feather edging. Cuts to a fine ?V? groove point. Ideal for sign writing.
Three Flute Engraving Bit
编号：TRE2877080M
●产品描述：
Trend HSS Snappy Drill Countersinks - SNAP/CS
Snappy drill-countersinks have 1/4" hex shanks with ball retainer recess for use in quick release bit adaptors or 3-jaw chucks. Heat treated tool steel countersink and HSS drill. Adjustable for different length screws and can produce a counterbored hole for standard size wood plugs. The drill produces pilot holes only.
Drill Diameter; 7/64" (No.8 Screw)
编号：TRE2873201B
●产品描述：
Trend Router Cutters
With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.
Two Flute Flush Trimming Bits
1/4" and 1/2" Shanks
编号：TRE2872178J
●产品描述：
Trend Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
1/4" and 1/2" Shanks
编号：TRE2873316D
●产品描述：
Trend Router Cutters
To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.
Two Flute Rounding Over Bits
编号：TRE2872206H
●产品描述：
Trend Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
1/4" and 1/2" Shanks
编号：TRE2872294F
●产品描述：
Trend Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
1/4" and 1/2" Shanks