Trend Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

1/4" and 1/2" Shanks

Trend Tungsten Carbide Planer Blade Set - PB/29

Trend solid carbide planer blades are manufactured from high grade carbide and are supplied in pairs. Precision ground with two cutting edges and reversible for extended life.

Blade length 82.0mm
Blade width 5.5mm
Blade thickness 1.1mm

To suit the following machines:
AEG (ATLAS COPCO): EH82, EH82.1, EH700, EH822, H750, H500, EH3-82, EH800, EH450
BLACK & DECKER: BD710, DN710, DN720, BD711, KW712, KW713, KW725, BD713, BD725
BOSCH: PHO2-82, PHO3-82/B, PHO15-82, PHO16-82,PHO25-82, PHO30-82, PHO100, PHO150, PHO200, PH300, 1592-9, GHO282, GH31-82, GHO36-82C
CASALS: CE82, CE98ACE
DEWALT: DW677, DW678K, DW678EK, DW680, D26500, D26501
DRAPER: PT682, P882
FELISATTI: TP282
FERM: FP82
FREUD: FE82, FE82VCE
HAFFNER: FH224
HITACHI: F20*, FU20*, P20V, P20SA
HOLZ-HER: 2321, 2321-S, 2322, 2223 (NEW)
MAFELL: EHU82, MHU82, MHU82S, MHU82D
MAKITA: M102*, 1900*, 1900B* 1901*, 1125*, 1100*, 1923B*, 1923BD*, 1923H, 1902
METABO EXPERT: 4382, HO0882, HO8382
NUTOOL: NPT82
PERLES: SK82A
PEUGEOT: RA82CS, RA400, RA3/82
SKIL: 92H, 94H, 95H, 96H, 97H
RYOBI: L282, L1323A*, HL-82, L-1835, L180, GH014, EPN-7582
WOLF/KANGO: 8614*, 8057*, 8108
*Requires conversion kit.

Trend Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

1/4" and 1/2" Shanks

Router Cutters

With Pin Guide. To trim laminate producing a bevelled edge. With ball bearing guide suitable for straight or shaped work.

Bevel Edge Trimming Bits

Trend Router Cutters

For drilling slotting, cutting aluminum anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes.

Single Flute Helical

Trend Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

1/4" and 1/2" Shanks

Trend Router Cutters

To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.

Two Flute Rounding Over Bits

Trend HSS Snappy Drill Countersinks - SNAP/CS

Snappy drill-countersinks have 1/4" hex shanks with ball retainer recess for use in quick release bit adaptors or 3-jaw chucks. Heat treated tool steel countersink and HSS drill. Adjustable for different length screws and can produce a counterbored hole for standard size wood plugs. The drill produces pilot holes only.



Drill Diameter; 1/8" (No.10 Screw)

Trend Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

1/4" and 1/2" Shanks

Trend Router Cutters

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

Two Flute Flush Trimming Bits

1/4" and 1/2" Shanks