产品 / 动力工具 & 磨料磨具 / 电动工具附件
编号：TRE2877082P
●产品描述：
Trend HSS Snappy Drill Countersinks - SNAP/CS
Snappy drill-countersinks have 1/4" hex shanks with ball retainer recess for use in quick release bit adaptors or 3-jaw chucks. Heat treated tool steel countersink and HSS drill. Adjustable for different length screws and can produce a counterbored hole for standard size wood plugs. The drill produces pilot holes only.
Drill Diameter; 1/8" (No.10 Screw)
编号：TRE2872136V
●产品描述：
Trend Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
1/4" and 1/2" Shanks
编号：TRE2872206H
●产品描述：
Trend Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
1/4" and 1/2" Shanks
编号：TRE2872294F
●产品描述：
Trend Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
1/4" and 1/2" Shanks
编号：TRE2877083Q
●产品描述：
Trend Tungsten Carbide Universal Countersink - UNI/CS
This TCT countersink clamps onto any drill between 3.0mm and 7.2mm in diameter. Recommended for wood and man-made boards. By reversing the countersink on the drill, it can be used as a non-cutting depth stop. Ensures flutes of drill are aligned with flutes of countersink. Do not overtighten screw. Not suitable for production applications and not suitable for ferrous and non-ferrous metals.
编号：TRE2873811B
●产品描述：
Trend Tungsten Carbide Adjustable Countersink - 6200/TC
Designed to drill and countersink simultaneously, a wide variety of materials. With a HSS slow spiral drill bit. Fully adjustable, supplied with hex key. TCT version is used for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals.
编号：TRE2873237L
●产品描述：
Trend Router Cutters
To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.
Two Flute Rounding Over Bits
编号：TRE2873812C
●产品描述：
Trend Tungsten Carbide Adjustable Countersink - 6200/TC
Designed to drill and countersink simultaneously, a wide variety of materials. With a HSS slow spiral drill bit. Fully adjustable, supplied with hex key. TCT version is used for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals.
编号：TRE2873203D
●产品描述：
Trend Router Cutters
With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.
Two Flute Flush Trimming Bits
1/4" and 1/2" Shanks
编号：TRE2877080M
●产品描述：
Trend HSS Snappy Drill Countersinks - SNAP/CS
Snappy drill-countersinks have 1/4" hex shanks with ball retainer recess for use in quick release bit adaptors or 3-jaw chucks. Heat treated tool steel countersink and HSS drill. Adjustable for different length screws and can produce a counterbored hole for standard size wood plugs. The drill produces pilot holes only.
Drill Diameter; 7/64" (No.8 Screw)