Fast Fit Rear Seat Cover

Designed as a "quick to fit" rear seat cover suitable for many makes of estate car, twincab & hatchbacks. Approx 220 x 150 cms. Accepts 3 point seat belts on all seats. Use also as a boot liner, ground sheet or security blanket.

Door Controls

This comprehensive range of Door Controls feature varying power sized units for many different door applications. They come with a choice of architectural covers which are each available in 26 different plated or colour coated finishes.
To help select the correct closer for you, each unit has a listing showing their key features, certification numbers and fire ratings. Plated arms are available on certain units only, and test certificates are available upon request.

BS EN1154 Classification
This standard classifies door closers using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standards performance requirements.
Digit (1) - Category of use:
?3? denotes the unit is for closing doors from at least 105.
?4? denotes the unit is for closing doors from 180 open.
Digit (2) - Durability:
?8? successfully completed 500,000 test cycles.
Digit (3) - Test door mass/size:
Seven grades are identified as shown in the table below (where a
closer provides a range of power sizes both the minimum and
maximum sizes shall be shown):
Power size Test door mass Recommended door leaf width
1 20kg 750mm
2 40kg 850mm
3 60kg 950mm
4 80kg 1100mm
5 100kg 1250mm
6 120kg 1400mm
7 160kg 1600mm
Digit (4) - Fire behaviour:
?0? denotes the unit is NOT suitable for use on fire/smoke doors.
?1? denotes the unit IS suitable for use on fire/smoke doors.
Digit (5) - Safety in use:
?1? all door closer units are required to stisfy the essential requirement of safety in use.
Digit (6) - Corrosion-resistance:
?0? - indicates no defined corrosion-resistance,
?1? - indicates mild corrosion-resistance,
?2? - indicates a moderate level of corrosion-resistance,
?3? - indicates high corrosion-resistance,
?4? - indicates very high corrosion-resistance.
Within this section units have been tested to BS EN1154, with many units also having been tested to current Certifire testing and CE test criteria. Therefore, the 6 digit classification is shown against each of the varying units, thus indicating their performance and grading under BS EN1154.

An example of the grading for a 1559 closer unit would be as follows:

3 8 4/2 1 1 3
(1) (2) (3) (4) (5) (6)

Electro-Magnetic Fire Stay - Plated Finish

Plated finish. Electro-magnetic holds open fire doors but releases in the event of fire. Closing force size 4 (EN1155). Maximum door width 950 - 1100mm. Suitable for doors 60 - 80kg. Adjustable check action. Adjustable latch action. Hold open from 70 - 180. Two cover options available for this unit.

AT7 PVC Electrical Insulation Tape

Features:
Flame retardant and self extinguishing - safe to use on electrical cables.
Wide range of colours - suitable for colour coding.
UV resistant.
Manufactured to BS EN60454 which is the European standard for PVC and other electrical insulating tapes.

Applications:
Colour coding and insulation of electrical cabling.
Masking off during chemical and electro-plating.
Degaussing and coil wrapping.
Colour coding components, intermediate stock and finished goods during manufacture.
Masking and protection of aircraft portholes during manufacture.
Masking off aircraft landing gear when cadmium plating.
Cable harnessing, insulation, abrasion protection for OEM companies in household appliances market.
Temporary strapping of socks and protective pads for sports people.

Specifications:
Thickness: 0.13mm.
Breaking load: 26 N/cm.
Elongation: 180%.
Adhesion to steel: 2.4 N/cm.
Adhesion to self: 2.1 N/cm.
Service temp: -5C to 70C.
Roll length: 33 Metres.

Multi Purpose Metal Cable Lockout

The Brady Multi Purpose 2.44M cable lockout device can be used to lockout multiple control points with a single device.

Perfect for your unusual energy isolating devices that are difficult to lock out.

Easy to use - simply hold device in one hand and clinch tight with the other! Supplied with vinyl coated metal cable.



Product Number: 050943
Colour: Red
Cable: Metal vinyl coated
Accepts padlocks: Shackle Clearance 20mm. Shackle Diameter 7mm
Cable Length: 2.44M

SiteSafe® Photoluminescent Safety Signs - Rigid

In the event of a fire or emergency, the visibility of standard emergency signs can often be impaired by poor lighting, smoke or even lack of power. In these cases our photoluminescent signs can provide a cost effective solution.

Our signs use the internationally recognised British Standard symbols for escape routes (BS5499) like their standard counterparts.

High intensity 1.3mm rigid material, tested to DIN 67510 Part 4 specification, which significantly exceeds the minimum Photoluminescent Safety Products Association (P.S.P.A.) Class 1 classification for brightness and longevity. Non-radioactive, non-toxic with no lead or phosphorous. Signs remain highly visible even in complete darkness. Factory applied self-adhesive backing.

Safe Condition Signs

Magnetic Wrap-Round Pockets for Roll Cages

These Magnetic Wrap-Round Pockets are durable and hard wearing they are designed for Industrial Roll Cages or mesh containers. Each is manufactured in tough plastic and has a unique looped magnetic header that is designed to wrap around the mesh of a cage. A special flap shields the opening of each pocket providing your documentation with protection from the elements.

Edison™ LED Torches

6 super bright white LEDs
100,000 hour LED life
Battery life up to 50 hours (continuous)
Precision machined high-strength aluminium alloy case
Positive on/off
Polished finish
Water resistant
Complete with wrist strap
All joints sealed with 'O' rings
Expertly engineered and superbly balanced to give many years of service
Uses 2 x "AA" size batteries, supplied seperately - Order Code: EDI-904-3020K (pack of 4)
Overall length: 175mm
Gross Weight: 135g

Class Ref 2 Reflective Traffic & Works Safety Signs

Improve safety on your site, loading areas and the approach roads to your premises.
• Manufactured from 3mm Dibond with a durable Class Ref 2 reflective face.
• CE marked traffic signs comply with BS EN12899-1.
• Suitable for either wall or post mounting.

Anti-Slip Treads

self-adhesive treads that provide an anti-slip finish to improve safety on concrete, metal or wood surfaces.
Colour: Black.
Tread size: 610mm x 150mm.

Mobile Scissor Lift Tables

High quality, UK manufactured mobile scissor tables that conform to all the relevant EU regulations. More cost effective than modifying the static equivalent. These tables can be fitted with many extras including roller tops, bellows, ball tops etc. High quality robust construction. Capacities from 125Kg - 1250Kg. Lift heights from 840mm - 2900mm. Table top sizes up to 1000 x 2000mm. Heavy duty arms, bearings & hydraulics. All models fitted with overload valve & slow lowering valve to control the lowering speed. Manual hydraulic & battery electric lifts are available. Nylon bushes at all scissor arm hinge points. One braked castor fitted as standard, both castors have toe guards. Safety cut off (trip bar) on all battery electric models. Each table is issued with operating instructions and a test certificate in conformance with EU standards EN 1570 and BS:5325:1980. Special sizes are also available - Contact your local branch for further details.

Manual Operation